NEC NP4100-06FL NP4100 : installation guide - Page 1

NP4100 Installation Guide Desktop and Ceiling Mount NEC Display Solutions of America, Inc. v 1.1 Contents Product Description, Lens Specs, Screen/Aspect Ratio Notes and Formulas Diagrams & Distance Charts; 4:3 16:9 Lens Shift Adjustable Range Tilt Capabilities Cabinet Dimensions Lens Dimensions Ceiling Mount Dimensions Input Panel and Control Codes Pg 1 Pg 2 Pg 3 Pg 4 Pg 5 Pg 6 Pg 7 Pg 8 Pg 9 Product Description Type: 1 chip DLP Projector 0.7 DMD Resolution: 1024 x 768 (4:3) / 1024 x 576 (16:9) Powered: Lens Shift, Horizontal & Vertical /Zoom/ Focus Fan Noise: 38 dB / 34dB @ 1 meter Network Ready Dimensions: 19.88" (W) x 8.23" (H) x" 15.16 (D) Weight: 38.6 lbs Brightness: 6200 ANSI Lumens BTU's: 2425 BTU/hour Power Consumption: 710W (max) Lens Specifications NP06FL: Throw Ratio: ~ 0.77:1 Focal Length: 11.4mm Screen Sizes: 50"-200" F/#:2.0 NP07ZL: Throw Ratio: ~1.33 - 1.79:1 Focal Length: 19.3 - 25.8mm Screen Sizes: 40" - 500" F/#:1.8 - 2.3 NP08ZL: Throw Ratio: ~1.78 - 2.35:1 Focal Length: 26.0 - 34.0mm Screen Sizes: 40" - 500 " F/#:1.7 - 1.9 NP09ZL: NP10ZL: Throw Ratio: ~2.22 - 4.43:1 Screen Sizes: 40" - 500" Throw Ratio: 4.43 -8.3:1 Screen Sizes: 40" - 500" Focal Length: 32.0 - 63.0mm F/#:2.1 - 2.9 Focal Length: 48.8 - 77.6mm F/#:2.2 - 3.1 Screen/Aspect Ratio Both 4:3 and 16:9 screens are fully supported with proper aspect ratio control for both type sources using NEC developed scaling technology. Menu selections have aspect ratio control for each source type. Notes  For screen sizes not indicated on the projection tables, use the formulas below. If the figures on the tables do not match the results of formulas, use the figures in the table.  All calculations are based on 4:3 aspect ratio.  Distances are in inches, for millimeters multiply by 25.4.  Distances may vary 5%. Formulas The Projection Formulas use the image width for calculation. Image width is the same for all aspect ratios, only vertical image size varies. For proper projector placement, determine the image width for a desired screen size. Use the Screen Formulas below to calculate all screen dimensions. Plug in the image width for "W" in the Projection Formulas. Refer to the diagrams and charts for popular screen sizes on page 2 and 3: Projection Formulas: NP06FL: C = 0.808W - 1.644 NP07ZL: C(Wide) = 1.361W - 1.833 --------- C(Tele) = 1.831W - 1.800 NP08ZL: C(Wide) = 1.823W - 2.524 --------- C(Tele) = 2.403W - 2.447 NP09ZL: C(Wide) = 2.298W - 4.133 --------- C(Tele) = 4.579W - 4.226 NP10ZL: C(Wide) = 4.516W - 5.296 --------- C(Tele) = 8.514W - 5.512 Definitions: W = Image Width H = Image Height (size) C = Throw distance 4:3 Screen Formulas: W = H x 4/3 H = W x 3/4 Diagonal = W x 5/4 Note: Tilting the front of the projector from level up or down by more than 45° could reduce lamp life up to 20%. www.necdisplay.com 16:9 Screen Formulas: W = H x 16/9 H = W x 9/16 Screen Diagonal = W x 18.358/16 NP4100 Page 1 of 9