NEC NP4100W-10ZL NP4100W : installation guide - Page 1
NEC NP4100W-10ZL - WXGA DLP Projector Manual
UPC - 805736031416
View all NEC NP4100W-10ZL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
NP4100W Installation Guide Desktop and Ceiling Mount NEC Display Solutions of America, Inc. v 1.0 Contents Product Description, Lens Specs, Screen/Aspect Ratio Notes and Formulas Diagrams & Distance Charts; 16:10 16:9 4:3 Lens Shift Adjustable Range Tilt Capabilities Cabinet Dimensions Lens Dimensions Ceiling Mount Dimensions Input Panel and Control Codes Pg 1 Pg 2 Pg 3 ___ Pg 4 Pg 5 Pg 6 Pg 7 Pg 8 Pg 9 Pg 10 Product Description Type: 1 chip DLP Projector 0.65 DMD Resolution: 1280 x 800 (16:10) / 1066 x 800 (4:3) Powered: Lens Shift, Horizontal & Vertical /Zoom/ Focus Fan Noise: 38 dB / 34dB @ 1 meter Network Ready Dimensions: Weight: Brightness: BTU's: Power Consumption: 19.88" (W) x 8.23" (H) x15.16" (D) 38.6 lbs 5500 ANSI Lumens 2425 BTU/hour 710W (max) Lens Specifications NP06FL: Throw Ratio: ~ 0.77:1 Focal Length: 11.4mm Screen Sizes: 50"-200" F/#:2.0 NP07ZL: Throw Ratio: ~1.33 - 1.79:1 Focal Length: 19.3 - 25.8mm Screen Sizes: 40" - 500" F/#:1.8 - 2.3 NP08ZL: Throw Ratio: ~1.78 - 2.35:1 Focal Length: 26.0 - 34.0mm Screen Sizes: 40" - 500 " F/#:1.7 - 1.9 NP09ZL: NP10ZL: Throw Ratio: ~2.22 - 4.43:1 Screen Sizes: 40" - 500" Throw Ratio: 4.43 -8.3:1 Screen Sizes: 40" - 500" Focal Length: 32.0 - 63.0mm F/#:2.1 - 2.9 Focal Length: 63.5 - 117.4mm F/#:2.2 - 3.1 Screen/Aspect Ratio Both 4:3 and 16:9 screens are fully supported with proper aspect ratio control for both type sources using NEC developed scaling technology. Menu selections have aspect ratio control for each source type. Notes For screen sizes not indicated on the projection tables, use the formulas below. If the figures on the tables do not match the results of formulas, use the figures in the table. All calculations are based on 4:3 aspect ratio. Distances are in inches, for millimeters multiply by 25.4. Distances may vary 5%. Formulas The Projection Formulas use the image width for calculation. Image width is the same for all aspect ratios, only vertical image size varies. For proper projector placement, determine the image width for a desired screen size. Use the Screen Formulas below to calculate all screen dimensions. Plug in the image width for "W" in the Projection Formulas. Refer to the diagrams and charts for popular screen sizes on page 2, 3 and 4: Projection Formulas: Definitions: NP06FL: C = 0.817W - 1.54 W = Image Width NP07ZL: C(Wide) = 1.379W - 1.952 --------- C(Tele) = 1.854W - 1.809 H = Image Height (size) NP08ZL: C(Wide) = 1.844W - 2.362 --------- C(Tele) = 2.435W - 2.461 C = Throw distance NP09ZL: C(Wide) = 2.328W - 4.147 --------- C(Tele) = 4.639W - 4.175 NP10ZL: C(Wide) = 4.580W - 5.415 --------- C(Tele) = 8.603W - 5.352 16:9 Screen Formulas: W = H x 16/9 16:10 Screen Formulas: H = W x 9/16 W = H x 16/10 Diagonal = W x 18.358/16 H = W x 10/16 Diagonal = W x 18.867/16 4:3 Screen Formulas: W = H x 4/3 Note: Tilting the front of the projector from level up or down by more than 45° could reduce lamp life up to 20%. www.necdisplay.com H = W x 3/4 Screen Diagonal = W x 5/4 NP4100W Page 1 of 10