NEC P1150 Information Guide - Page 5

Controls Size and Position Controls Left/Right: Moves the image horizontally (left or right). Down/Up: Moves the image vertically (up or down). Narrow/Wide: Increases or decreases the horizontal size of the image. Short/Tall: Increases or decreases the vertical size of the image. Color Control/AccuColor® Control System Color presets 1 through 5 selects the desired color setting. The bar is replaced by the color setting choice from 1 to 5. Each color setting is adjusted at the factory to the stated degree Kelvin. If a setting is adjusted, the name of the setting will change from degree Kelvin to Custom. Red, Green, Blue: NEC's AccuColor Control System increases or decreases the monitor's red, green or blue color guns depending upon which is selected. The change in color will appear on screen and the direction (increase or decrease) will be shown by the bars. Geometry Controls Geometry Controls Menu The Geometry controls allow you to adjust the curvature or angle of the sides of your display. Sides In/Out (pincushion): Increases or decreases the curvature of the sides either inward or outward. Sides Left/Right (pincushion balance): Increases or decreases the curvature of the sides either to the left or right. Sides Tilt (parallelogram): Increases or decreases the tilt of the sides either to the left or right. Sides Align (trapezoidal): Increases or decreases the bottom of the screen to be the same as the top. Rotate (raster rotation): Rotates the entire display clockwise or counterclockwise. 78131622 3 5 7/29/98, 8:59 AM