NEC P462-AVT Users Manual - Page 27
ADVANCED OPTION, English-25
UPC - 805736038736
View all NEC P462-AVT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
English ADVANCED OPTION INPUT DETECT Selects the method of input detection the monitor uses when more than two input devices are connected. NONE The Monitor will not search the other video input ports. FIRST DETECT When the current video input signal is not present, then the monitor searches for a video signal from the other video input port. If the video signal is present in the other port, then the monitor switches the video source input port to the new found video source automatically. The monitor will not look for other video signals while the current video source is present. LAST DETECT When the monitor is displaying a signal from the current source and a new secondary source is supplied to the monitor, the monitor will automatically switch to the new video source. When current video input signal is not present, the monitor searches for a video signal from the other video input port. If the video signal is present in the other port, then the monitor switches the video source input port to the new found video source automatically. VIDEO DETECT DVD/HD, SCART, VIDEO1, VIDEO2 or S-VIDEO inputs will have priority over DVI, VGA, RGB/HV. When DVD/HD, SCART, VIDEO1, VIDEO2 or S-VIDEO input signal is present the monitor will change and keep to the DVD/HD, SCART, VIDEO1, VIDEO2 or S-VIDEO input. CUSTOM DETECT Set the priority of input signals. When CUSTOM DETECT is selected, monitor searches listed inputs only. INPUT CHANGE Sets input change speed. NOTE: When "QUICK" is selected, picture may be distorted when signal input is changed. This function should be chosen after all adjustment options have been made for the input. TERMINAL SETTING DVI MODE Selects the kind of DVI-D equipment which is connected to the DVI input. Select "DVI-PC" when PC or other computer equipment is connected. Select "DVI-HD" when DVD player, which has DVI-D output, is connected. BNC MODE Selects the type of signal associated with the BNC input. RGB: Analog input (R, G, B, H, V) COMPONENT: Component (Y, Cb/Pb, Cr/Pr) SCART: SCART signal VIDEO: Composite video (VIDEO2) HDMI SIGNAL RAW: Disable the expanded feature. EXPAND: Expand image contrast and increase detail in the dark and bright areas. DEINTERLACE Selects the IP (Interlace to Progressive) conversion function. Note: For DVI input "DVI-HD" needs to be enabled in the DVI mode menu. ON Converts interlaced signals to progressive. This is the default setting. OFF Disables IP conversion. This setting is best suited for motion pictures, but increases the risk of image retention. COLOR SYSTEM VIDEO1, VIDEO2, S-VIDEO inputs only The selected Color System depends on the video format of the input signal. AUTO Automatically chooses Color System setting based on input signal. NTSC PAL SECAM 4.43 NTSC PAL-60 NONE NORMAL DVI-PC RGB EXPAND ON AUTO English-25