NEC P554 Installation Guide - Page 9
Control Codes, Cable Connection
View all NEC P554 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
V554/P554 Installation Guide 55" LCD Display Control Codes: NEC Display Solutions of America, Inc. Rev 1.0 NOTE: Contact your NEC rep for codes not listed. Cable Connection: Communication Protocol: Interface: Communication System: Baud Rate: Data Length: Parity: Stop Bit Communication Code: RS-232C Asynchronous 9600 bps 8 bits None 1 bit ASCII Interface: Communication System: Communication Layer: IP Address: Port Number: Ethernet (CSMA/CD TCP/IP (Internet Protocol Suite) Transport layer (TCP) 192.168.0.10 (default out of box) 7142 (Fixed) Transmit Data+ Transmit DataReceive Data+ Not Used Not Used Receive DataNot Used Not Used NOTE: If so desired, jumper "Request to send" and "Clear to Send" together on both ends of the cable to simplify cable connection. These connections are not required. The only connections required are pins 2 (TxD), 3 (RxD) and 5 (GND). www.necdisplay.com V554/P554 Page 9 of 10