NEC PX-50XM3A 50XM3 - Page 6

Specifications Screen Size 43.5"(H)‫ן‬24.5"(V) inches 1106(H)‫ן‬622(V) mm diagonal 50" Aspect Ratio 16 : 9 Resolution 1365(H)‫ן‬768(V) pixels Pixel Pitch 0.032"(H)‫ן‬0.032"(V) inches 0.81(H)‫ן‬0.81(V) mm Color Reproduction 256 levels, 16,770,000 colors Signals Synchronization Range Horizontal : 15.5 to 110 kHz (automatic : step scan) Vertical : 50.0 to 120 Hz (automatic : step scan) Input Signals RGB, NTSC (3.58/4.43), PAL (B,G,M,N), PAL60, SECAM, HD*1 , DVD*1 , DTV*1 Input Terminals (VIDEO1 and RGB1 can also be used as OUTPUT terminals) RGB Visual 1 (Analog) Visual 2 (Analog) Visual 3 (Digital) mini D-sub 15-pin‫ן‬1 BNC (R, G, B, H/CS, V)‫ן‬1*2 DVI-D 24-pin‫ן‬1*3 Video Visual 1 Visual 2 Visual 3 BNC‫ן‬1 RCA-pin‫ן‬1 S-Video: DIN 4-pin‫ן‬1 DVD/HD/DTV Visual 1 Visual 2 RCA-pin (Y, PB[CB], PR[CR])‫ן‬1*1 BNC (Y, PB[CB], PR[CR])‫ן‬1*1, *2 Audio Stereo RCA‫ן‬3 (Selectable) External Control D-sub 9-pin‫ן‬1 (RS-232C) Sound output 9W+9W at 6 ohm Power Supply AC120V 50/60Hz Current Rating 6.4A (maximum) Power Consumption 480W (typical) Dimensions 48.1 (W)‫ן‬30 (H)‫ן‬3.8 (D) inches 1222 (W)‫ן‬736 (H)‫ן‬96(D) mm Weight 50XM3A: 96.6 lbs / 43.9 kg (without stand) 50XM3A/S: 97.9 lbs / 44.5 kg (without stand) Environmental Considerations Operating Temperature Humidity Altitude Storage Temperature Humidity Altitude 0°C to 40°C / 32°F to 104°F 20 to 80% (no condensation) 0 to 9180 feet / 0 to 2800 m -10°C to 50°C / 14°F to 122°F 10 to 90% (no condensation) 0 to 9840 feet / 0 to 3000 m Front Panel User Controls Power on/off, Input source select, Volume up/down/ OSM control Remote Control Functions Power on/off, Input source select, OSM control,Volume up/down, Cursor (UP, DOWN,LEFT, RIGHT), Pointer, Zoom up/ down, Off timer, Wireless/ Wired remote control OSM Functions Picture (Contrast/Brightness/Sharpness/ Color/Tint/ Picture mode/Noise reduction/Color temperature/ White balance/Gamma/Low tone/Color tune), Audio (Bass/Treble/Balance/Audio input), Image Adjust (Aspect mode/V-Position /H-Position/V-Height /H- Width/Auto Picture/Fine picture/Picture adjustment), Option1 (OSM/BNC Input/D-Sub Input/RGB Select/ HD Select/Input Skip/All Reset), Option2 (Power management/Cinema mode/Long life [PLE, Orbiter, Inverse, White, Screen wiper, Soft focus]/Gray level/ S1/S2/Picture size/DVI Set up), Option3 (Timer Power on mode/Control lock/IR Remote/Loop out/ID number/Video wall [Divider, Position, Disp. mode, Auto ID, Image adjust, Power on delay, PLE link, Timer]), Advanced OSM, Language*, Color system, Source information *English, German, French, Italian, Spanish, Swedish, Chinese 48.1" (1222) 43.5" (1106) 1.5" (38) 2.3" (58) 24.5" (622) 30" (736) 50XM3A: Bezel color is gray. 50XM3A/S: Bezel color is silver. 3.8" (96) Units are in inch (mm) The features and specifications may be subject to change without notice. *1 HD/DVD/DTV input signals supported on this system 480P (60 Hz) 480I (60 Hz) 525P (60 Hz) 525I (60 Hz) 576P (50 Hz) 576I (50 Hz) 625P (50 Hz) 625I (50 Hz) 720P (60 Hz) 1035I (60 Hz) 1080I (50 Hz) 1080I (60 Hz) *2 The 5-BNC connectors are used as RGB/PC2 and HD/DVD2 input. Select one of them under "BNC INPUT". *3 50XM3A is not compatible with HDCP. 50XM3A/S is compatible with HDCP. Supported Signals • 640‫؂‬480P @ 59.94/60Hz • 1280‫؂‬720P @ 59.94/60Hz • 1920‫؂‬1080I @ 59.94/60Hz • 720‫؂‬480P @ 59.94/60Hz • 720‫؂‬480I @ 59.94/60Hz Note: In some cases a signal on the plasma monitor may not be displayed properly. The proglem may be an inconsistency with standards from the source equipment (DVD, Set-top box, etc...). If you do experience such a problem please contact NEC Solutions (America), Inc. and also the manufacturer of the source equipment. Other Features Accessories Regulations Motion compensated 3D Scan Converter (NTSC, PAL, 480I, 576I, 525I, 625I, 1035I, 1080I), 2-3 pull down Converter (NTSC, 480I, 525I, 1035I, 1080I (60Hz)), 2-2 pull down Converter (PAL, 576I, 625I, NTSC, 480I, 525I), Digital Zoom Function (100-900% Selectable), Video Wall 2×2/ 3×3 multi screen, Self Diagnosis, Anti Image Burn (PLE LOCK1~3, INVERSE, WHITE, ORBITER (Auto1,2/Manual), SCREEN WIPER), Color Temperature select (high/mid/mid low/low, user has 4 memories), Control lock (Except power SW), Auto Picture, Input Skip, Color Tune, Low Tone (3 mode), Auto ID, Programmable Timer, Gamma Correction (4 mode), Loop through interface, Plug and play (DDC1, DDC2b, RGB3: DDC2b only) Remote control with two AAA batteries, Power cord, Manuals, Safety metal fitting parts, Ferrite cores, Bands, Cable clamps 50XM3A: UL Approved (UL 60950/CSA C22.2 No.60950-00) DOC Canada requirements Meets FCC Class A requirements 50XM3A/S: UL Approved (UL 60950 and UL65000/CSA C22.2 No.60950-00/ CAN/CSA-E60065-00) DOC Canada requirements Meets FCC Class B requirements 6