NEC PX-50XM4A 50XM4 IG - Page 9
Portrait Mode - support
View all NEC PX-50XM4A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Portrait Mode Rotating the Display The display must be rotated clockwise so the input panel is at the bottom and vents are at the top. Rotating the display counter-clockwise will not allow the unit to cool properly and will void the warranty. Vents Power Rotate Clockwise Inputs Rotating Source Content Note: The display is not capable of rotating any source content. PC Pivot® software from Portrait Displays, Inc. (www.portrait.com) allows you to rotate the Windows operating system 90 degrees. This software installs in Windows on the PC and allows you to select landscape or rotate 90 degrees to portrait mode. Everything running in the Windows environment is also rotated. Note: All displays connected to the PC will have to support rotating to portrait mode. NTSC Video NTSC Video has to be brought into a PC with the appropriate hardware and software, and sent back out through the PC graphics output. The method to rotate the video would then be the same as above and done within the PC Windows environment. www.necvisualsystems.com 50XM4 Page 9 of 9