NEC PX-50XM5A 42XM4/50XM5/61XM4 spec sheet - Page 2

42XM4 40.2" (1022mm) 50XM5 48.1" (1222mm) 61XM4 57.9" (1470mm) 42XM4 3.9" (98mm) Demand more from digital 50XM5 3.8" (96mm) 61XM4 4.7" (119mm) * 42XM4, 50XM5 and 61XM4 digital plasma displays. 42XM4 36.3" (922mm) 50XM5 43.5" (1106mm) 61XM4 53.2" (1351mm) 42XM4 20.2" (513mm) 50XM5 24.5" (622mm) 61XM4 29.9" (760mm) *42XM4 input panel located at bottom of plasma. 42XM4 24.0" (610mm) 50XM5 29.0" (736mm) 61XM4 34.6" (879mm) composite video VCR, security camera, document camera component game system, DVD, satellite/cable RGBHV/component DVD, PC, satellite/cable DVI-D satellite/cable, PC S-Video VCR, document camera, DVD, satellite/cable 15 pin D-Sub PC UNIQUE FEATURES Advanced AccuBlend Ensures detailed images when non-native resolution sources are connected to the projector. Phosphor Protection 6 modes - A comprehensive set of built-in modes protects your screen from image retention. Enhanced Mass Area Superior Eliminates jagged lines, removes color separation Sampling (Enhanced MASS) and improves detail for crystal clear images. Capsulated Color Filter™ CCF delivers realistic color reproduction creating the (CCF) technology greatest color space when plotted on the C.I.E. Chromaticity chart. (50XM5, 61XM4) AccuCrimson™ Filter Further enhances the effects of the CCF producing technology better reds and greens. Color Tune Technology Adjust individual colors without affecting white balance. Gamma 12 Provides the highest color processing in a plasma display at 68.7 billion colors (4096 steps) resulting in increased detail never seen before... no matter what the viewing environment! Crystal Clear Panel/Drive provides technology to improve brightness and contrast greater than 100% over previous models and also removes false contouring (42XM4 only). Enhanced Split Screen Yes Closed captioning Yes *60,000 hour panel life is an approximate time for the display panel to reach half of it's original brightness. The panel life is based on motion video as the input source and all display settings at factory default. This time may vary if the source varies and monitor settings are not at factory default. The time given does not imply any warranty beyond the products standard warranty. For more information, call 1.800.NEC.INFO or visit www.necvisualsystems.com NEC is a registered trademark of NEC Corporation. All other trademarks are the property of their respective owners. All specifications subject to change without notice. NEC Solutions (America), Inc. Visual Systems Division 1250 Arlington Heights Rd., Suite 400 Itasca, IL 60143-1248 PLASMA MODULE Screen Size (Diagonal) PX-42XM4A 42" PX-50XM5A 50" PX-61XM4A 61" Screen Aspect Ratio 16 to 9 Active Screen Area PX-42XM4A 36.3 x 20.2 in, 922 x 513 mm PX-50XM5A 43.5 x 24.5 in, 1106 x 622 mm PX-61XM4A 53.2 x 29.9 in, 1351 x 760 mm Native Resolution PX-42XM4A XGA 1024 x 768 PX-50XM5A WXGA 1365 x 768 PX-61XM4A WXGA 1365 x 768 Pixel Pitch PX-42XM4A 0.900mm x 0.671mm PX-50XM5A 0.81mm x 0.81mm PX-61XM4A 0.99mm x 0.99mm Color Processing 68.7 billion colors, 4096 levels Viewing Angle 160° Plasma Module Half Life* 60,000 hours Filter Type Anti-reflective SIGNAL COMPATIBILITY/CONNECTIVITY Scan Rate Supported Video Standards SD/HD Video Signal Compatibility PC Signal Compatibility Macintosh Compatibility Input/Output Terminals Audio External Control ELECTRICAL Horizontal: 15.5 to 110.0 kHz auto, step scan - Vertical: 51 to120 Hz auto, step scan PAL, SECAM, 3.58/4.43 NTSC, ATSC 480i, 480p, 525i, 525p, 540p, 625i, 625p, 720p, 1035i, 1080i,1080p VGA, SVGA, XGA, SXGA, UXGA, WideVGA (848x480, 852x480), WideXGA (1360x768) Yes RGB 1 (analog) 15-pin mini D-sub (common use with RGB out, selectable) RGB 2 (analog) 5 BNC (RGB/HV) (common use with 5BNC Y/Pb/Pr input, selectable) RGB 3 (digital) 24-pin DVI-D HDCP (EIA/CEA-861-A) compatible Video 1 Composite BNC x 1 (common use with Video out, selectable) Video 2 Composite RCA x 1 Video 3 S-Video 4-Pin DIN HD Video 1 1 set RCA Component (Y,Pb,Pr/Y,Cb,Cr) HD Video 2 1 set BNC Component (Y,Pb,Pr/Y,Cb,Cr) (common use with 5BNC Y/Pb/Pr input,selectable) Audio 3 sets RCA stereo + external speaker jacks Internal amplifier, 8W x 2 output power (42XM4), 9W X 2 output power (50XM5 & 61XM4) RS232, IR (IR loopthrough) Power Requirements Power Consumption Standby Power MECHANICAL 120-240V 50/60 Hz PX-42XM4A 285W Typical PX-50XM5A 435W Typical PX-61XM4A 540W Typical 0.9W Dimensions (WxHxD) PX-42XM4A 40.2 x 24 x 3.9 in, 1022 x 610 x 98 mm PX-50XM5A 48.1 x 29.0 x 3.8 in, 1222 x 736 x 96 mm PX-61XM4A 57.9 x 34.6 x 4.7 in, 1470 x 879 x 119 mm Net Weight PX-42XM4A 61.1 lbs., 30.0 kg PX-50XM5A 97.9 lbs., 44.5 kg PX-61XM4A 134.2 lbs., 61.0 kg Regulations Regulatory FCC Class B, UL 60950-1:2003. CAN/CSA C22.2 No60950-1-03 Fan Noise 22dB ENVIRONMENTAL Operating Temperature Operating Humidity Operating Altitude Storage Temperature Storage Humidity Storage Altitude WARRANTY 32°- 104° F (0° - 40° C) 20 - 80% 0 - 9180 feet (0 - 2800m) 14 - 122° F (-10 - 50° C) 10 - 90% 0 to 9840 feet (0 - 3000m) 1 Year Parts & Labor IN THE BOX AC Power Cord, User Manual, Remote Control, Batteries, Cable Clamps ACCESSORIES Order Code 4250WMK 61WMK PX-ST1U PX-61ST1U CMK FWMKPC TWMKPC CMKPC PX-42SP1U PX-50SP1U PX-61SP1U PX-CV2U PX-PL1U Description Fixed/Tilt wall mount for 42" and 50" models Fixed/Tilt Wall mount for 61" model Tabletop Stand for 42" and 50" models Tabletop Stand for 61" model Ceiling Mount Kit for 42" and 50" models Fixed wall mount that accommodates 3rd party slim line PC (42" and 50" models only) Tilt wall mount that accommodates 3rd party slim line PC (42" and 50" models only) Ceiling mount that accommodates 3rd party slim line PC (42" and 50" models only) Attachable Speakers for 42" model Attachable Speakers for 50" model Attachable Speakers for 61" model Input Terminal Cover Stand Plug NEC 100523