NEC VT465 User Manual - Page 16

To connect SCART output (RGB) Before connections: An exclusive SCART adapter (ADP-SC1) and a commercially available SCART cable are required for this connection. NOTE: Audio signal is not available for this connection. Video equipment such as DVD player RGB IN Projector 1. Turn off the power to the projector and your video equipment. 2. Use the NEC ADP-SC1 SCART adapter and a commercially available SCART cable to connect the RGB input of your projector and a SCART output (RGB) of your video equipment. 3. Turn on the power to the projector and your video equipment. 4. Use the RGB button on the remote control to select the RGB input. 5. Press the MENU button on the remote control to display the menu. 6. From the menu, select [Advanced] → [Signal Select RGB] → [Scart]. SCART is a standard European audio-visual connector for TVs, VCRs and DVD players. It is also referred to as Euro-connector. Commercially available Female SCART cable To RGB IN ADP-SC1 NOTE: The ADP-SC1 SCART adapter is obtainable from your NEC dealer in Europe. Contact your NEC dealer in Europe for more information. Connecting an External Monitor Audio cable (not supplied) PHONE RGB signal cable (supplied) RGB signal cable (not supplied) You can connect a separate, external monitor to your projector to simultaneously view on a monitor the RGB analog image you're projecting. To do so: 1. Turn off the power to your projector, monitor and computer. 2. Use a 15-pin cable to connect your monitor to the RGB OUT (Mini D- Sub 15 pin) connector on your projector. 3. Turn on the projector, monitor and the computer. NOTE: • The RGB OUT connector outputs RGB signal during standby mode. When the projector goes into standby mode, the image on an external monitor disappears for a moment. • When the projector is in the standby mode, the image may not be correctly displayed while the cooling fans are running immediately after turning on or off the power. • Daisy chain connection is not possible. E-14