NEC VT470 VT47/470/575/670/676 UM - Page 25
Connecting Your DVD Player with Component Output, Signal Select] - projector manual
View all NEC VT470 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
2. Installation and Connections Connecting Your DVD Player with Component Output VT676/VT670/VT575/VT470 COMPUTER 1 IN AUDIO VIDEO IN L/MONO AUDIO R COMPUTER 1 IN AUDIO COMPUTER 2 IN S-VIDEO IN L/MONO AUDIO R AUDIO OUT MONITOR OUT PC CONTROL VT47 COMPUTER IN VIDEO IN L/MONO AUDIO R AUDIO COMPUTER IN S-VIDEO IN MONITOR OUT PC CONTROL AC IN Optional 15-pin - to - RCA (female) ן3 cable (ADP-CV1) Component video RCAן3 cable (not supplied) Y Cb Cr DVD player LR Component AUDIO OUT Audio Equipment AUDIO IN LR Audio cable (not supplied) You can connect your projector to a DVD player with component output or Video output. To do so, simply: 1. Turn off the power to your projector and DVD player. 2. If your DVD player has the component video (Y,Cb,Cr) output, use a commercially available component video cable (RCAן3) and the optional 15-pin-to-RCA (female)ן3 cable to connect your DVD player to the COMPUTER IN connector on the projector. For a DVD player without component video (Y,Cb,Cr) output, use common RCA cables (not provided) to connect a composite VIDEO output of the DVD player to the Video Input of the projector. 3. Connect the supplied power cable. See page 20. 4. Turn on the projector and DVD player. A component signal will be automatically displayed. If not, from the menu, select [Advanced] → [Signal Select] → [Computer], and then place a check mark in the Component radio button. NOTE: Refer to your DVD player's owner's manual for more information about your DVD player's video output requirements. 18