NEC VT560 User Manual - Page 18
Connecting Your VCR or Laser Disc Player, Connecting the Supplied Power Cable
UPC - 050927239878
View all NEC VT560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Connecting Your VCR or Laser Disc Player Video cable (not supplied) S-Video cable (not supplied) VCR/ Laser disc player AUDIO OUT LR Audio equipment AUDIO IN LR S-VIDEO OUT VIDEO OUT Audio cable (not supplied) Use common RCA cables (not provided) to connect your VCR, laser disc player or document camera to your projector. To make these connections, simply: 1. Turn off the power to the projector and VCR, laser disc player or document camera. 2. Connect one end of your RCA cable to the video output connector on the back of your VCR or laser disc player, connect the other end to the Video input on your projector. Use an audio cable (not supplied) to connect the audio from your VCR or laser disc player to your audio equipment (if your VCR or laser disc player has this capability). Be careful to keep your right and left channel connections correct for stereo sound. 3. Turn on the projector and the VCR or laser disc player. NOTE: Refer to your VCR or laser disc player owner's manual for more information about your equipment's video output requirements. NOTE: An image may not be displayed correctly when a Video or S-Video source is played back in fast-forward or fast-rewind via a scan converter. Connecting the Supplied Power Cable Connect the supplied power cable to the projector. First connect the supplied power cable's two-pin plug to the AC IN of the projector, and then connect the other plug of the supplied power cable in the wall outlet. E-16