NEC VT650 User Manual - Page 42
<Control Panel Key Lock> - user manual
UPC - 050927235986
View all NEC VT650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
[Page 3] (Advanced mode) Setup Page1 Page2 Auto Adjust Auto Start Power Management Power Off Confirmation Keystone Save Page3 On On On On On Page4 Off Off Off Off Off When "Auto Adjust" is set to "On", the projector automatically determines the best resolution for the current RGB input signal to project an image using NEC's Advanced AccuBlend Intelligent Pixel Blending Technology. The image can be automatically adjusted for geometry and stability; "Horizontal Position", "Vertical Position", "Clock" and "Phase". On: Automatically adjusts image "Horizontal Position", "Vertical Position", "Clock" and "Phase". Off: User can adjust the image display functions ("Horizontal Position", "Vertical Position", "Clock" and "Phase") manually. Turns the projector on automatically when the power cable is inserted into an active power outlet. This eliminates the need to always use the "Power" button on the remote control or projector cabinet. When this option is on and there is no RGB input for five minutes or more, the projector will automatically turn itself off. NOTE:This feature does not work with Video or S-Video sources. This option determines whether a confirmation dialog for turning off the projector will appear or not. NOTE: When the confirmation message is displayed, you must be in the Projector mode to operate your projector using the remote control. If not, press the PJ button on the remote control to change your projector to the Projector mode. The button lights to indicate that you are in the Projector mode. This option enables you to save your current keystone settings. Saving your change once affects all sources. The changes are saved when the projector is off. [Page 4] (Advanced mode) Setup Page1 Page2 Default Source Select Default Source Communication Speed Control Panel Key Lock Clear Lamp Hour Meter Clear Filter Usage Page3 Select RGB 19200bps Unlock Page4 You can set the projector to default to any one of its inputs each time the projector is turned on. Last: Auto: Select: Sets the projector to default to the previous or last active input each time the projector is turned on. Searches for an active source in order of RGB → Video → S-Video and displays the first found source. Displays the selected source input every time the projector is started up. Select an input from the pull-down menu. This feature sets the baud rate of the PC Control port (Mini DIN 8 Pin). it supports data rates from 4800 to 19200 bps. The default is 19200 bps. Select the appropriate baud rate for your equipment to be connected. Setup Page1 Page2 Default Source Select Default Source Communication Speed Control Panel Key Lock Clear Lamp Hour Meter Clear Filter Usage Page3 Select RGB 19200bps Unlock Page4 This option turns on or off the Control Panel Key Lock function. NOTE: • When the cabinet buttons are not locked, "Control Panel Key Lock - Unlock" will be displayed. When the cabinet buttons are locked, "Control Panel Key Lock - Lock" will be displayed. • This Control Panel Key Lock does not affect the remote control and the PC Control functions. E-36