NEC VT660K User Manual - Page 32

TROUBLESHOOTING This section helps you resolve problems you may encounter while setting up or using the projector. Power Indicator Indicator Condition Off Blinking light Green 0.5 sec On, 0.5 sec Off Orange 0.5 sec On, Steady light Green Orange 0.5 sec Off Projector Condition Note The main power is off. - The projector is getting ready Wait for a moment. to turn on. The projector is cooling down. Wait for a moment. The projector is turned on. - The projector is in Standby. - Status Indicator Indicator Condition Projector Condition Note Off Blinking light Red Normal - 1 cycle (0.5 sec On, Lamp cover error or lamp Replace the lamp cover or 2.5 sec Off) housing error lamp housing correctly. 2 cycle (0.5 sec On, Temperature error The projector is overheated. 0.5 sec Off) Move the projector to a cooler location. Green 4 cycle (0.5 sec On, Fan error 0.5 sec Off) 6 cycle (0.5 sec On, Lamp error 0.5 sec Off) Re-firing the lamp Fans will not work correctly. Lamp fails to light. Wait a full minute and then turn on again. The projector is re-firing. Steady light Orange Control Panel key locked You have pressed control panel key when Control Panel Key Lock is enabled. Lamp Indicator Blinking light Indicator Condition Off Red Steady light Red Green Projector Condition Note Normal - Lamp has reached its end of Replace the lamp. life. Lamp replacement mes- sage will be displayed. Lamp has been used beyond Replace the lamp. its limit. The projector will not turn on until the lamp is re- placed. Lamp mode is set to Eco mode. - E-32