NEC X554UNS User's Manual

NEC X554UNS Manual

Get NEC X554UNS PDF manuals and user guides View all NEC X554UNS manuals
Add to My Manuals
Save this manual to your list of manuals

NEC X554UNS manual content summary:

  • NEC X554UNS | User's Manual - Page 1
    User's Manual MultiSync X464UN MultiSync X464UNV MultiSync X554UN MultiSync X554UNS
  • NEC X554UNS | User's Manual - Page 2
    Indicator...English-17 Using Power Management ...English-17 Selecting a video source...English-17 Picture Aspect...English-17 Information OSD ...English-18 44 Features ...English-45 Troubleshooting...English-46 Specifications - X464UN ...English-47 Specifications - X464UNV ...English-48 Specifications
  • NEC X554UNS | User's Manual - Page 3
    cables with the MultiSync X464UN (X464UN)/MultiSync X464UNV (X464UNV)/MultiSync X554UN (X554UN)/MultiSync X554UN (X554UN(C))/MultiSync X554UNS (X554UNS) and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this
  • NEC X554UNS | User's Manual - Page 4
    SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION: CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL read carefully in order to avoid any problems. CAUTION: Please use the power cord 230 220 100 * When operating the MultiSync monitor with its AC 125-240V
  • NEC X554UNS | User's Manual - Page 5
    ANSI/NFPA 70, the National Electrical Code (NEC), in particular Section 820.93, Grounding of monitor from the wall outlet and refer servicing to qualified service personnel under the following does not operate normally by following operating instructions. Recommended Use • For optimum performance,
  • NEC X554UNS | User's Manual - Page 6
    MultiSync monitor box* should contain the following: • LCD monitor • Power cord*1 • Video Signal Cable (DisplayPort cable) • LAN cable • Setup Manual • Clamp x 1 (X464UN/X464UNV)/x 3 (X554UN/X554UNS) • Screw with washer (M4 x 10) x 1 (X464UN/X464UNV Wall mount • Tabletop Stand • Remote Control Kit (
  • NEC X554UNS | User's Manual - Page 7
    it is strong enough to support the weight of the unit so that the unit will be safe from harm. • Refer to the instructions included with the mounting equipment for detailed information. • Make sure there is no gap between the monitor and the bracket. • When used in a video wall configuration for
  • NEC X554UNS | User's Manual - Page 8
    those instructions included with the stand or mounting apparatus. Use only those devices recommended by the manufacturer. NOTE: For X464UN/X464UNV, that can damage the monitor. When using mounting accessories other than NEC compliant and approved, they must comply with the VESA-compatible mounting
  • NEC X554UNS | User's Manual - Page 9
    the optional table top stand. 640 mm (X554UN/X554UNS) 100 mm (X464UN/X464UNV) Screw Holes (X464UN/X464UNV) Screw Holes (X554UN/X554UNS) Clamp Cord or chain Screw (M4) Before attaching the LCD monitor to the wall, make sure that the wall can support the weight of the monitor. Be sure to remove the
  • NEC X554UNS | User's Manual - Page 10
    (INPUT) Acts as SET/POINT ZOOM button within OSD menu. (Toggle switches between [DVI], [DPORT], [HDMI], [VGA] or [Y/Pb/Pr], [SCART]*, [VIDEO]*, [S-VIDEO]*, [DPORT2]*, [DPORT3]*, [HDMI2]*, [RGB/HV]* or [Y/Pb/Pr2]*). These are available input only, shown as their factory preset name. ¿ PLUS button
  • NEC X554UNS | User's Manual - Page 11
    to an external device (stereo receiver, amplifier, etc.). ´ Service port This USB slot is for future software upgrades. ² LAN port signal which is displayed. See page 25 VIDEO OUT SETTING. To output signal which is RGB output. * This connector does not support analog input. ƹ Option board slot Slot
  • NEC X554UNS | User's Manual - Page 12
    /Pr: Y/Pb/Pr, SCART*2, Y/Pb/Pr2*2 RGB/HV*2: RGB/HV VIDEO*2: VIDEO, S-VIDEO OPTION: Depends on your connection » PICTURE MODE button Selects picture mode, [ DOWN button (CH/ZOOM +/-)*1 Increases or decreases POINT ZOOM level. ƽ GUIDE button*1 ƾ MUTE button Turns on/off mute function. ƿ STILL
  • NEC X554UNS | User's Manual - Page 13
    Activates REMOTE ID function. MTS button*1 button*1 Activates closed captioning. NOTE: VIDEO*2, S-VIDEO*2 inputs only. *1: This button's action depends on which option board you use. Refer to the option board's manual for further information. *2: This function depends on which option board you use
  • NEC X554UNS | User's Manual - Page 14
    by two 1.5V AAA batteries. To install or replace batteries: NEC recommends the following battery use: • Place "AAA" size batteries matching main power before making connections. • Refer to your equipment user manual for further information. NOTE: Do not connect/disconnect cables when turning
  • NEC X554UNS | User's Manual - Page 15
    English 5. Switch on the power of all the attached external equipment When connected with a computer, switch on the power of the computer first. 6. Operate the attached external equipment Display the signal from the desired input source. 7. Adjust the sound Make volume adjustments when required. 8.
  • NEC X554UNS | User's Manual - Page 16
    all the attached equipment and make connections. * Refer to the user manual included with each separate piece of equipment. Wiring Diagram DVD Player chained have a limit to the connectable monitors. Solid lines = video signal Dotted lines = audio signal Computer (Digital) Connected equipment
  • NEC X554UNS | User's Manual - Page 17
    • If you use with a Macintosh PowerBook, set "Mirroring" to Off on your PowerBook. Refer to your Macintosh's owner's manual for more information about your computer's video output requirements and any special identification or configuration your monitor's image and monitor may require. • Input TMDS
  • NEC X554UNS | User's Manual - Page 18
    Basic Operation Power ON and OFF Modes The LCD monitor power indicator will turn green while powered on and will turn red or amber while powered off. NOTE: The Main Power Switch must be in the ON position in order to power up the monitor using the remote control or the Power Button. OFF Main Power
  • NEC X554UNS | User's Manual - Page 19
    alternately SETTINGS" enabled Diagnosis (Detecting failure) Red Blinking (See Troubleshooting page 46) *1 If "OFF" is selected in POWER INDICATOR (page power consumption of the display. NOTE: Depending on the PC and video card used, this function may not operate. NOTE: The monitor automatically
  • NEC X554UNS | User's Manual - Page 20
    ᕥ Sub picture information Picture Mode DVI, VGA, RGB/HV*, DPORT, DPORT2*, DPORT3* STANDARD sRGB CUSTOM1 CUSTOM2 HIGHBRIGHT HDMI, Y/Pb/Pr, SCART*, VIDEO*, S-VIDEO*, HDMI2*, Y/Pb/Pr2* STANDARD CINEMA CUSTOM1 CUSTOM2 HIGHBRIGHT *: This function depends on which option board you use. English-18
  • NEC X554UNS | User's Manual - Page 21
    Sub Menu PICTURE MODE Select 70 50 50 50 50 50 THANK YOU FOR SAVING THE ENVIRONMENT. CARBON FOOTPRINT 86.0 % Goto Adjustment Return Close Key Guide Adjustment Settings Press UP or DOWN button to select sub-menu. Press SET/POINT ZOOM. Press UP or DOWN, PLUS or MINUS to select the
  • NEC X554UNS | User's Manual - Page 22
    setting) 2.2 Typical display gamma for use with a PC. 2.4 Good for video (DVD, etc.) S GAMMA Special gamma for certain types of movies. Raises PROGRAMMABLE1, 2, 3 A programmable gamma curve can be loaded using NEC optional software. MOVIE SETTINGS NOTE: When INPUT2 of SUPER is selected
  • NEC X554UNS | User's Manual - Page 23
    RESOLUTION VGA, RGB/HV*1 inputs only Adjusts the vertical size of the image. INPUT RESOLUTION VGA, RGB/HV*1 inputs only If there is a problem with signal detection, this function forces the monitor to display the signal at the desired resolution. After selection, execute "AUTO SETUP" if required
  • NEC X554UNS | User's Manual - Page 24
    BASS To accentuate or reduce the low frequency sound. 0 Press + button to increase BASS sound. Press - button to decrease BASS sound. SURROUND Artificial surround sound. NOTE: Audio out is disabled when this function is set to ON. OFF PIP AUDIO Selects source of PIP audio. MAIN AUDIO LINE
  • NEC X554UNS | User's Manual - Page 25
    English BLEND DETECT FADE IN RESET OSD LANGUAGE ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL SVENSKA Sets the transparency of the Text Ticker (0: transparent, 100: opaque). Enables auto-detection of the Text Ticker. Enables fade-in of the text ticker. Resets PIP options back to factory settings
  • NEC X554UNS | User's Manual - Page 26
    to three buttons from DVI, DisplayPort, VGA, HDMI, Y/Pb/Pr, VIDEO*1, S-VIDEO*1, OPTION*1 which you prefer to be unlocked. The unselected buttons are locked uence to displayed image. NOTE: If FRAME COMP is set to AUTO or MANUAL, V SCAN REVERSE is not available. The image may be distorted when turning
  • NEC X554UNS | User's Manual - Page 27
    RESET Resets "MULTI DISPLAY" options back to factory settings except for POWER ON DELAY and - VIDEO OUT SETTING. DISPLAY PROTECTION POWER SAVE Sets how long the monitor waits to go into power network connected to the monitor when "MANUAL" is selected for [IP SETTING]. 192.168.0.10 English-25
  • NEC X554UNS | User's Manual - Page 28
    keep to the Y/Pb/Pr, Y/Pb/Pr2*1, SCART*1, VIDEO*1 or S-VIDEO*1 input. CUSTOM DETECT Set the priority of input signals. When CUSTOM DETECT is selected, monitor searches listed inputs only. LONG CABLE COMP*1 (Analog input only) Manually compensates for image degradation caused from using a long
  • NEC X554UNS | User's Manual - Page 29
    -quit PC. Please use this function only when the operating system cannot be shut down manually. *1: This function depends on which option board you use. *2: Multi-Stream Transport requires the corresponding video card. Contact your dealer for limitations of this function. DVI-HD RGB RGB OFF 1.1a
  • NEC X554UNS | User's Manual - Page 30
    120Hz (not adjustable) TOUCH PANEL (not adjustable) RESET Resets the following settings within the ADVANCED OPTION menu back to factory setting: INPUT DETECT (except the priority of input signals), INPUT CHANGE (except for INPUT1 and INPUT2), TERMINAL SETTING, DEINTERLACE, COLOR SYSTEM, OVER SCAN
  • NEC X554UNS | User's Manual - Page 31
    and a residual image remains, the monitor should be turned off for one hour to erase the image. As with all personal display devices, NEC DISPLAY SOLUTIONS recommends displaying moving images and using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor
  • NEC X554UNS | User's Manual - Page 32
    called the REMOTE CONTROL ID mode. The REMOTE CONTROL ID mode works in conjunction with the Monitor ID, allowing control of up to 100 individual MultiSync monitors. For example: if there are many monitors being used in the same area, a remote control in normal mode would send signals to every
  • NEC X554UNS | User's Manual - Page 33
    . NOTE: Multiple monitors that are daisy-chained have a limit to the connectable monitors. When manually specify the ID number or control by the specified ID number, please execute AUTO ID Connector IN OUT LAN1 LAN2 Connection MultiSync MultiSync LAN1 LAN2 LAN1 LAN2 LAN Cable LAN Cable
  • NEC X554UNS | User's Manual - Page 34
    Sound Mute ON or OFF. Connection LCD Monitor + PC MultiSync PC RS-232C RS-232C Cable NOTE: If your PC please use the control command. Instructions for the control command can be found display. The file is called "External_control.pdf". 1) Interface PROTOCOL BAUD RATE DATA LENGTH
  • NEC X554UNS | User's Manual - Page 35
    pdf" file on the CD-ROM. Function (Monitor ID = 1) Power ON Power OFF Input Source Select DisplayPort Input Source Select DVI Input Source Select VGA Input Source Select HDMI Input Source Select Y/Pb/Pr Input Source Select VIDEO Input Source Select S-VIDEO 30 30 36 30 30 30 30 46 03 04 0d 01 30 41 30
  • NEC X554UNS | User's Manual - Page 36
    Controlling the LCD monitor via LAN Control Connecting to a Network Using a LAN cable allows you to specify the Network Settings and the Alert Mail Settings by using an HTTP server function. To use a LAN connection, you are required to assign an IP address. Example of LAN connection: Server
  • NEC X554UNS | User's Manual - Page 37
    host name using a compatible browser. Example 1: When the host name of the monitor has been set to "pd.nec.co.jp", access is gained to the network setting by specifying http://pd.nec.co.jp/index.html for the address or the entry column of the URL. Example 2: When the IP address
  • NEC X554UNS | User's Manual - Page 38
    delete the setting. DNS Set for IP ADDRESS setting of DNS server. AUTO: Automatically assign an IP address of DNS server connected to the monitor. MANUAL: Set your IP address of DNS server connected to the monitor. PRIMARY DNS Set your primary DNS settings of the network connected to the monitor
  • NEC X554UNS | User's Manual - Page 39
    . TIP: The Alert Mail settings will not be affected even when [RESET] is done from the menu. For Control command diagram, please see file "External_Control.pdf" on the CD-ROM. English-37
  • NEC X554UNS | User's Manual - Page 40
    supplier. Reconfirm the setting condition from OSD (DISPLAY PROTECTION-FAN CONTROL) or please contact your supplier. Please check "No picture" in "Troubleshooting". Please get a log by using PD external command. See page 43. Please contact your supplier. Sample: The following examples are content of
  • NEC X554UNS | User's Manual - Page 41
    English SNMP Setting Click "SNMP" on the left side of HOME. This function allows for getting status and controlling of a monitor via the network. Version: SNMP v1 Authenticated plaintext by community name, not return a confirmation message of Trap. SNMP v2c Authenticated plaintext by community name
  • NEC X554UNS | User's Manual - Page 42
    detect the device from AMX Device Discovery. CRESTRON Setting Click "CRESTRON" on the left side of HOME. CRESTRON ROOMVIEW compatibility The monitor supports CRESTRON ROOMVIEW, allowing multiple devices connected in the network to be managed and controlled from a computer or a controller. For more
  • NEC X554UNS | User's Manual - Page 43
    of different manufacturers. This standard protocol is established by Japan Business Machine and Information System Industries Association (JBMIA) in 2005. The device supports all the commands of PJLink Class 1. Setting of PJLink will not be affected even when [RESET] is done from the menu. English
  • NEC X554UNS | User's Manual - Page 44
    PD List Information Click "PD LIST" on the left side of HOME. Show the list of ID and IP address of multiple monitors that are daisy-chained. Only the master monitor can show the list. Memo Setting Click "MEMO" on the left side of HOME. Set a title and meesage. TITLE MESSAGE MEMO PASSWORD MEMO
  • NEC X554UNS | User's Manual - Page 45
    VGA, Y/Pb/Pr, HDMI, DPORT, HDMI2*, DPORT2*, DPORT3*, RGB/HV*, Y/Pb/Pr2*, SCART*, VIDEO*, S-VIDEO*, OPTION* ② Resolution ex. (H)1920, (V)1080 , (H)1360, (V)768 or No signal or Invalid signal ⑦ 0h/0m/0s NOTE: For Proof of Play function, please see "External_Control.pdf" on the CD-ROM. English-43
  • NEC X554UNS | User's Manual - Page 46
    ADVANCED OPTION2 FACTORY RESET MODEL NAME SERIAL NUMBER Display information MANUFACTURED DATE FIRMWARE1 FIRMWARE2 MAC ADDRESS All data for service Read/Write R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W Read only Read only Read only Read only Read only Read only Read only English-44
  • NEC X554UNS | User's Manual - Page 47
    same as on the color printout (with sRGB supporting operating system and sRGB printer). This allows you ) third party mounting arm or bracket. NEC recommends using mounting interface that comply with is a system for preventing illegal copying of video data sent over a Digital Visual Interface (DVI
  • NEC X554UNS | User's Manual - Page 48
    Troubleshooting supported mode has been selected on the display card or system being used. (Please consult display card or system manual your text is garbled, change the video mode to noninterlace and use 60Hz refresh contact your nearest authorized NEC DISPLAY SOLUTIONS service facility. • If the 46
  • NEC X554UNS | User's Manual - Page 49
    X464UN Product Specifications LCD Module 46"/1168 mm diagonal Pixel Pitch: 0.530 mm Resolution: 1920 x 1080 Color: Over 16 million colors (depending on video BASE-T Remote IN: Stereo Mini jack 3.5 Service port USB service port for maintenance Power Supply 3.0 - manual, Power Cord, Video Signal
  • NEC X554UNS | User's Manual - Page 50
    X464UNV Product Specifications LCD Module 46"/1168 mm diagonal Pixel Pitch: 0.530 mm Resolution: 1920 x 1080 Color: Over 16 million colors (depending on video BASE-T Remote IN: Stereo Mini jack 3.5 Service port USB service port for maintenance Power Supply 2.6 - manual, Power Cord, Video
  • NEC X554UNS | User's Manual - Page 51
    Pin D-sub LAN: RJ-45 10/100 BASE-T Remote IN: Stereo Mini jack 3.5 Service port USB service port for maintenance Power Supply 3.8 - 1.6 A @ 100-240V AC, 50/60Hz Slot 2 type OPTION 16V/3.6 A Accessories Setup manual, Power Cord, Video Signal cable (DisplayPort to DisplayPort cable), LAN cable
  • NEC X554UNS | User's Manual - Page 52
    Pin D-sub LAN: RJ-45 10/100 BASE-T Remote IN: Stereo Mini jack 3.5 Service port USB service port for maintenance Power Supply 3.8 - 1.6 A @ 100-240V AC, 50/60Hz Slot 2 type OPTION 16V/3.6 A Accessories Setup manual, Power Cord, Video Signal cable (DisplayPort to DisplayPort cable), LAN cable
  • NEC X554UNS | User's Manual - Page 53
    English Pin Assignment 1) Analog multi input (MiniDsub15p): VGA, Y/Pb/Pr Pin No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Name Red, Y/Pb/Pr_Pr Green, Y/Pb/Pr_Y Blue, Y/Pb/Pr_Pb GND DDC-GND Red-GND Green-GND Blue-GND +5V (DDC) GND NC DDC-SDA H-SYNC V-SYNC DDC-SCL Mini D-SUB 15P (Monitor side) 1 5 6 10
  • NEC X554UNS | User's Manual - Page 54
    Saving mode. Mode Power consumption Normal Operation*1 Approx. 120 W (X464UN) Approx. 90 W (X464UNV) Approx. 150 W (X554UN) Approx. 150 W (X554UNS) product, or if applicable, follow any agreements made between yourself and NEC. The mark on electrical and electronic products only applies to the
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
User’s Manual
MultiSync X464UN
MultiSync X464UNV
MultiSync X554UN
MultiSync X554UNS