NaceCare TP18DX Smart Kit Installation Manual - Page 3
Hold washer on inside of the tank, ensuring it is held
 |
View all NaceCare TP18DX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Remove two screws (top right and bottom right) from machine plate as shown. Attach chemical mounting bracket as shown with longer screws and washers provided with kit hardware **IF NEEDED On left side of top tank, use mounting bracket as a template drill through the tank. With rivets and washers provided, insert rivet into bracket/tank. Hold washer on inside of the tank, ensuring it is held tightly against the tank. Using rivet gun install rivet and make sure rivet grabs washer tightly against the tank. **washer prevents rivets from coming loose** 3
-
1 -
2 -
3 -
4 -
5 -
6
 |
 |
3
Remove two screws (top right and bottom right)
from machine plate as shown.
Attach chemical mounting bracket as shown with
longer screws and washers provided with kit
hardware
**IF NEEDED
On left side of top tank, use mounting bracket as a
template drill through the tank.
With rivets and washers provided, insert rivet into
bracket/tank.
Hold washer on inside of the tank, ensuring it is held
tightly against the tank.
Using rivet gun install rivet and make sure rivet grabs
washer tightly against the tank.
**washer prevents rivets from coming loose**