NaceCare TTB1620T TTB1620T Owners Manual - Page 29
Always Ensure That The Machine Is, Switched Off Prior To Charging., Fig 42, Fig 45, Fig 44, Fig 47
View all NaceCare TTB1620T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Machine Charging ! ALWAYS ENSURE THAT THE MACHINE IS SWITCHED OFF PRIOR TO CHARGING. ! The battery meter displays the charge level of the batteries; when fully charged, all meter lights are illuminated (Fig 42). Fig 42 As the machine is used and the batteries are discharged, the meter lights will go out from right to left. Fig 43 If the battery-charge level is allowed to discharge to the point that only the red light remains illuminated, the operator must consider charging the machine. If the battery-charge level is allowed to discharge to the point that only one red light remains illuminated (and begins to flash), all cleaning functions will automatically be disabled and the operator should drive the machine straight to a suitable charge point. Fig 44 The large capacity gel batteries are sealed for life and are totally maintenance free. The on-board charger automatically monitors the charging process and will switch off when the batteries are fully charged. Insert the charging lead required for your country (Fig 44) into the charging point. Fig 45 Fig 45 The machine charging point is located to the rear of the machine under the control panel. (Fig 45). Connect to a suitable power supply (Fig 47). Fig 47 Once mains power is connected the red charging indicator will illuminate. To ensure a full charge, the machine should be left for a period of 8-12hrs. Once fully charged, disconnect the charging lead from both the power supply and the machine. 29