Nady ENC-I Manual - Page 13

SPECIFICATIONS ENC-I OVERALL SYSTEM PERFORMANCE Frequency Response Dynamic Range 2152-02d0B,000 Hz, +/-3dB Total Harmonic Distortion < 0.3% RF Carrier Frequency Range 169‑216 MHz Frequency Stability +/- 0.005%, crystal controlled Modulation FM (F3E), +/-20KHz max. Operating Range Up to 250 ft. typical (depending on site conditions); up to 500+ feet optimum line-of-sight ENC-I RECEIVER Controls Connectors LED Indicators Dimensions (Max.) Weight Power Requirements Antenna Power ON/OFF, volume control, mute control Balanced XLR and unbalanced adjustable 1/4" audio out jacks, 2.1 mm barrel-type DC input jack Power ON, 5‑LED RF & AF level displays , 1.75" x 7.5" x 8.1" (4.4 x 19 x 20.7 cm) 1.6 lbs (.73 kg) 12V @ 400mA, nominal, AC/DC adapter supplied 11.2" (28.5 cm), single telescopic TRANSMITTERS Audio Inputs • WHT • WLT/WGT Controls • WHT • WLT/WGT LED Indicator RF Power Out Harmonic & Spurious Emissions Battery Battery Life Dimensions • WHT • WLT/WGT Weight (w/o battery) • WHT • WLT/WGT Nady DM-10D neodymium dynamic cartridge 3.5mm mono locking jack for connecting to omni or unidirectional lavalier mic or unidirectional head worn mic, with phantom power (WLT); or connecting to instrument cable (WGT) OFF/STANDBY/ON switch OFF/STANDBY/ON switch, input level adjust Unit "ON" (single flash), Low Battery Alert (steady) 50mW (Max. allowed by FCC) > -40dB 9V Alkaline Up to 15 hours 9.5" X 1.4" Diam. (24.1 X 3.5 cm) 4.1" X 2.4"X 0.8" (10.4 X 6.1 X 2.0 cm) 6.9 oz (193 g) 3.6 oz (101 g) Specifications subject to change at any time without prior notice for purposes of product improvement 13