Nady PMX-600 Owners Manual - Page 11

S P E C I F I C AT I O N S 1. INPUT SECTION Input Connector MONO CH MIC XLR BALANCED MONO CHANNEL LINE 1/4" UNBALANCED 1/4" TRS BALANCED AUX RETURN 1/4" UNBALANCED TAPE IN STEREO RCA JACKS INSERT INPUT 1/4" UNBALANCED With Trim, Tape In, and Aux Return Level controls set to Mid (50%) *With Trim set to Min (0%) Input Impedance 2.8KΩ 10KΩ 20KΩ 10KΩ 10KΩ 10KΩ Max Level +13dBu, 3.6V RMS* +17dBu, 5.5V RMS +23dBu, 11V RMS +11dBu, 2.8V RMS +18dBu, 6V RMS +22dBu, 10V RMS Phantom Power on XLR inputs ...48VDC, globally selected 2. MIXER SECTION Trim ...Range 28dB Channel High EQ +/-15dB ...12KHz, Rotary control Channel Mid EQ +/-15dB ...Variable 250Hz - 6KHz, Two Rotary controls Channel Low EQ +/-15dB ...80Hz, Rotary control Channel Aux 1, Aux 2 Eff, Pan ...Rotary controls Low Cut, L-R Select, G1-2 Select...Push-button switches Channel faders ...-∞ to +10dB, 60mm sliders Echo Effect Time Delay ...0 to 200mS Dual 7-Band EQ +/-12dB 63Hz, 250Hz, 630Hz, 1KHz, 2.5KHz, 6.3KHz, 15KHz 20mm sliders Master and Group dual faders, Effect single fader ...-∞ to +10dB, 60mm sliders 3. MASTER OUTPUT SECTION Channel Input to Main Output Frequency Response ...20Hz~25KHz (+/- 3dB) THD + Noise ...0.04% S/N Ratio ...-85dB (gain controls @ unity), -94dB (gain controls down) Noise Floor ...350uV (gain controls @ unity), 150uV (gain controls down) Output AUX SEND 1 & 2 GROUP 1 & 2 CONTROL ROOM L-R RECORD OUT MAIN L-R HEADPHONE **When connected to 32Ω output Connector 1/4" UNBALANCED 1/4" UNBALANCED 1/4" UNBALANCED STEREO RCA JACKS 1/4" UNBALANCED XLR BALANCED 1/4" STEREO Output Impedance 200Ω 200Ω 200Ω 1.4KΩ 200Ω 400Ω 12Ω Max Level +21dBu, 9V RMS +18dBu, 6V RMS +8dBu, 1.9V RMS +21dBu, 8.5V RMS +21dBu, 8.5V RMS +27dBu, 17V RMS 2 x 50mW, 1.75V RMS** 4. POWER OUTPUT SECTION Power Output 8Ω Both Channels Driven (1% THD) ...150W RMS per side 4Ω Both Channels Driven (1% THD) ...200W RMS per side Channel Input to Speaker Output Frequency Response ...25Hz~22KHz (+/- 3dB) THD...0.09% S/N Ratio ...-72dB (gain controls @ unity), -85dB (gain controls down) Noise Floor ...9mV (gain controls @ unity), 2mV (gain controls down) Amplifier Protection Fan cooling, short circuit protection, current limiting, Speaker DC protection circuits, clip indicators, Power ON/OFF relays for anti-thump circuit 5. GENERAL Power Requirements ...Voltage selectable, 115VAC/60Hz or 230VAC /50Hz Fuse Requirements ...5x20mm glass tube F.B. 8A 250V @ 115VAC 4A 250V @ 230VAC PMX-1600 Weight ...35.25 lbs. (16 Kg) Dimensions (HWD) ...6.4" x 28.7" x 17.2" (163 x 729 x 437mm) PMX-600 Weight ...24.5 lbs. (11.1 Kg) Dimensions (HWD) ...6.4" x 16.9" x 17.2" (163 x 430 x 437mm) The specifications above are correct at the time of printing of this manual. For improvement purposes, all specifications for this unit, including design and appearance, are subject to change without prior notice. 11