Naxa NAB-4002 NAB-4002 manual - English - Page 4
Connecting
 |
View all Naxa NAB-4002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Connecting The NAB-4002 can connect to speaker docks that are made for iPod®/iPhone® or to speakers with a 3.5mm AUX input. The unit will turn on automatically when it is connected to the dock. If it does not, press and hold the Pair button for 3 seconds to turn it on. iPod® and iPhone® Docks 1) Set the dock to iPod mode. (Refer to the manual of your dock for instructions.) 2) Connect the NAB-4002 to the dock. The dock connector [6] is found on the bottom of the unit. 3) The NAB-4002 will turn on automatically and the pair status indicator [4] will flash slowly. A beep will sound when the unit has been recognized. To turn off the unit, press and hold the Power/Pair button. Page 4 Naxa Electronics
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
Page 4
Naxa Electronics
Connecting
The NAB-4002 can connect to speaker docks
that are made for iPod
®
/iPhone
®
or to speak-
ers with a 3.5mm AUX input.
iPod
®
and iPhone
®
Docks
1)
Set the dock to iPod mode. (Refer to the
manual of your dock for instructions.)
2)
Connect the NAB-4002 to the dock. The
dock connector [6] is found on the bot-
tom of the unit.
3)
The NAB-4002 will turn on automatically
and the pair status indicator [4] will flash
slowly. A beep will sound when the unit
has been recognized.
The unit will turn on automatically when it is
connected to the dock. If it does not, press and
hold the Pair button for 3 seconds to turn it on.
To turn off the unit, press and hold the
Power/Pair button.