Naxa NCA-601 NCA-601 English Manual - Page 4
OFF->LOCAL/DXonly
![]() |
View all Naxa NCA-601 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
b) When pressed and hold for 2 seconds, it is activated as cyclical mode of following functions for user's selection. ->BEEP (ON/OFF) -> USER SET(FLAT/CLASSIC/ROCK/POP) ->VOL(LAST/DEFA) ->STEREO/MONO(only for FM mode)->LOUD(ON/ OFF)->LOCAL/DX(only for FM mode)->CLK(ON/OFF)->CLK(12/24)mode. After selecting the desired mode, rotate the VOL knob to select one setup item of the desired mode. BEEP ON/BEEP OFF BEEP ON mode: The beep is generated when any key is pressed. BEEP OFF mode: The beep sound is disabled. VOL LAST/VOL DEFA VOL LAST: The radio switches on at the actual volume it had when it was last switched off. VOL DEFA: After pressing SEL button, AVOL will be displayed. Then you can pre-select a constant switch-on volume by using the VOL knob. CLK ON/OFF CLK ON: Clock will always show on the display when power off. CLK OFF: Clock will disappear on the display when power off. 3. POWER ON/OFF,MUTE BUTTON When the unit is power off, the unit comes to ON by pressing any button on the front panel (except the OPEN key ). It also can turn on the unit to insert a disc, SD card or USB stick into their slots or socket. When the unit is power on, press and hold the power button for more than 0.5 seconds, the unit goes into power off mode. This button serves to switch the MUTED state on/off. Press this button to suppress the loudspeaker temporarily, and press again to resume listening. The muted state will be also released when the MODE, SEL button is pressed and VOL knob on the front panel is used. 4. LCD Display 5&6. TUNE, SEEK, TRACK, SKIP UP / DOWN BUTTONS a) During RADIO mode: Press the >> or I« button shortly to manual tune up/down for the desired radio station frequency step by step. Press and hold the »I or I« button for longer 0.5 seconds, to automatically tune up/down for the radio station frequency of strong signal. b) During disc, SD/MMC, USB playback mode: Press the >>I button briefly to play next track. Press the I« button briefly to play the current track from the beginning of it if the playing time is more than 2 seconds. Press the I« button briefly to play the previous track if the playing time is less than 2 seconds. Press the >> or I« button and hold to skip forwards or backwards, release to resume normal playback. 7. BAND BUTTON During radio mode, press the BND button briefly to select the radio broadcasting band you would like to hear. The AM/FM band is toggled cyclically through the tuning bands: ->FM 1-> FM 2 -> FM 3 -> MW 1->MW 2 ->. Page 3
![](/manual_guide/products/naxa-nca601-nca601-english-manual-439e199/4.png)