Naxa NCA-605 NCA-605 English Manual - Page 6
requirements
View all Naxa NCA-605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
INSTALLATION METHOD This is an anti-theft installation method. The main unit wears a METAL MOUNTING SLEEVE. Please connect the wiring, eg, the Power Supply, the Speakers and the Antenna according to the requirements of this Instruction Manual, then install the metal mounting sleeve into the car as per the diagram illustrated below. To boost up the capability of anti-jamming, please make sure fix tightly the metal support strap into the metal joint that connect to the chassis of the car. METAL SUPPORT STRAP DASHBOARD METAL MOUNTING SLEEVE fi FIXED FACEPLATE UNIT CHASSIS Bend the tabs on the metal mounting Sleeve against the DASHBOARD with a screwdriver FRONT PANEL ,,,,,,PLASTIC TRIM RING To remove the unit out of the metal mounting sleeve, insert the two supplied KEYS into the left and right side slots of the chassis at the same time. Then pull the chassis out of the metal mounting sleeve as shown in the right illustration. WIRES CONNECTION WHITE= RCA OUTPUT FRONT LEFT SPEAKER JACK RED= RCA OUTPUT FRONT RIGHT SPEAKER JACK ISO SOCKET ANTENNA JACK CONNECTOR A 1. 2. 3. 4. Memory +12V 5. Auto Antenna Output 6. 7. 12V (To Ignition Key) 8. GROUND Page 5 03 [15 TT n 112 1.I4 06 08 -ri C Cl, 11 03 05 07 m >A 02 cr, ISO SOCKET SKETCH CONNECTOR B 1. Rear Right Speaker (+) 2. Rear Right Speaker (-) 3. Front Right Speaker (+) 4. Front Right Speaker (-) 5. Front Left Speaker (+) 6. Front Left Speaker (-) 7. Rear Left Speaker (+) 8. Rear Left Speaker (-)