Naxa ND-837 ND-837 English Manual - Page 9

Brightness: Press the direction left and right button to move the indicator to set the brightness Of video output. Sharpness: Press the direction left and right button to move the indicator to set the sharpness of video output. Front Speakers Center Speaker Surround Speakers Subwoofer Test tones Center delay Surr.delay Digital Output V : Lar : Large : Large : Present :off : No Delay : No Delay : PCM Front speakers 1. Large: default Center Speaker: Surround Speakers: Subwoofer 1. Large: Normally select this. 2. None: When the sound distods.seiect this, This activates the Dolby Digital bass redirection and outputs the bass frequencies of the center speaker from other speakers. 3. None: If you do not connect this speaker,select 'Off 4. On: default Rip : SelectChannel 5.1 Language Front Speakers :Large Center Speaker :Large MOO Surround Spoi.k.r. •1.• Sub,,00fer None Test tones (/Present Center Surr.delay Mac Digital Output 1. Off: Does not output digital signal. 2. PCM:Conveets to PCAlt2CHM8KHz audio.Select PCM when using the Analog Audio Output. 3.aae: Outputs Bitstream through the digital output without any conversion. Use Default Settings Er 3LIW Misc Use Default Settings: M functions resume initial statuses if you choose 'Yes this option. :N . Wee Audiel UseDefault Settin• s DVD Pnorty: DVD audio is a format specially designed to provide the highest possible seep fidelity capable on DVD. DVD Video is MPEGII format specially designed to provide better possible video definition output on DVD. The CardReader & USBFuncion Operation 00. ** .*** 0> It• y f my* After insert Card or USB, and the player will auto search the directories saved JPEG/13MINGIF rtes. After searching. it will auto go to the first directory saved JPEG fies(to the disc containing both JPEG Rtes: To the disc containig single type of Rtes. a will auto go to the first directory) and play the last song in the directory ( TA01001- is Nghbghted). The screen displays as the picture [Won. r- •1a cz,-) rnrCii WI as IS 400 Chaos the table of contents you want to play by moving the dir. rection keys . Play the fast track under this contents kg You may choose the file you want to play by moving the direction keys. Troubleshooting SYMPTOM AND SOLUTION: Symptom No power Reason(s) Power cord not connected to the wall outlet TV not set up with correct settings Solution(s) Connect them well Set up TV in the correct mode No picture Video cables improperly secured or connected Connect them properly Audio cables improperly secured or connected Connect them properly No sound External audio systemnot turnedon Power it on The audio output setting is not correct. Set it to the correct mode Disc is dirty. Distorted picture In fastforward or fastbackward mode Clean the disc or try another one. Sometimes, a tiny distortion appears, it is a normal Luminance unsteady or picture with noise Circuitry influence Do not load disc in condition. Connect DVD video player to TV directly Place disc in The disc is improperly loaded toad a readable disc in (check the disc type) Unable to play The disc is loaded upside down Disc not loaded properly in the guide slot Replace the disc with the label side up toad the disc correctly Disc dirty Clean the disc TV screen shows device menu selected Press Setup button to turn off the menu. Key not working on the remote. Power wave or other abnormal phenomenon (such as static) disturbs the normal condition. Remote control does not work Do not point remote control at the remote sensor directly. Remote control is too far from DVD unit. Batteries are depleted. Switch on/offpower or unplug/rcplug the power cord. Point remote control at the remote Operate remote control within 7 meters (23 ft) ofTVs Replace the batteries and insert with the correct polarity. Page 13 Page 14