Naxa NE-963 English and Spanish Manual - Page 1

Frontࠦ NE-963 METRO GO Wireless Headphones Operation manual Please read the manual before operating this product. Contents 1 Introduction 1 2 Package Contents 2 3 Product Diagram 2 4 How To Use 3 4.1 General functions 3 4.2 Pairing to mobile phone 4 4.3 Charging your headphones 5 5 Product Specifications 6 6 FAQ 7 1.Introduction Congratulations, and thank you for choosing Naxa Metro Wireless Headphones. This manual will help you operate the Naxa Metro Wireless Headphones, but you should first familiarize yourself with the Bluetooth® functionality of your mobile phone or other device before using the Naxa Metro Wireless Headphones. Safety Rules 1 Please follow the rules depicted in this manual closely to ensure your safety. Before using the product, we would strongly encourage you to read through this user manual. 2 Be wary of any edges, uneven surfaces, metal parts, accessories and its packaging to prevent any possible injury or damage. 3 Do not modify, repair or dismantle the product. Doing so may result in fire, electric shock, complete breakdown of the product, etc. All of which are not covered under warranty. 4 Do not use any diluent or volatile liquid to clean the product. 5 Do not use the product in a hazardous location. 1 2. Package Contents 1X Micro USB Cable 1X Wireless Bluetooth® Headphones 1X Instruction Manual WARRANTY 1X Warranty card 3.Product Diagram (1) Vol-/Previous Track (2) Multi-Function Button (3) Vol+/Next Track (4) Micro USB Charging Port (5) 3.5 mm line in Foldable Headband (1) (2) (3) (4) (5) 2 4.How To Use 4.1.General Functions Desired Result Required Action Turn on & Enter the pairing mode Long press the Multi-Function Button. Pairing Use a Bluetooth® enabled mobile phone or other Bluetooth® enabled device to perform necessary pairing actions. Turn off Long press the Multi-Function Button. Charging Answering a Call Plug the Micro USB plug into the micro USB charging port. Press the Multi-Function Button to answer phone calls, press the Multi-Function Button again to end calls. Press two times will redial. Play / Pause Music Press the Multi-Function Button to play music and press it again to pause music. Short press the - button for turn Vol-/ down the volume, long press for Previous Track move previous song. Vol+/ Next Track Short press the + button for turn up the volume, long press for move next song. 3 English 4.2.Pairing to a mobile phone To use your Bluetooth® headphones, you must first pair your headphones with a phone. Once your Bluetooth® headphones are paired to mobile phone, they will remain paired and automatically recognize each other whenever they are within range. Pairing to a Bluetooth® Enabled Mobile Phone • Turn on your phone and ensure the Bluetooth function is activated. • Long press the call key 3 seconds, entered the pairing mode when the blue & red light flashing. • Search the Bluetooth® devices on your phone by following the phone's instructions. Refer to your phone's user manual for more information. • After a few seconds the phone will list the "NAXA NE-963" as a discover device. Select it and follow your phone's instructions to select this pairing. • The blue light flash means the pairing is successful. 4.3.Charging your headphones Use the Micro USB cable provided with these headphones. Connect the Micro USB plug to the Micro USB charging port on the headphones. Connect the USB plug to a USB port on a computer or wall adapter to activate charging. * Make sure to charge the headphones for a minimum of 3 hours before initial use. USB Plug Micro USB Plug Warning: You must select a qualified charger from a regular manufacturer. You must charge the Bluetooth headphones if it has been not used for more than 12 months. 5.Product Specifications Driver Diameter 40mm Frequency Range 20Hz-20KHz Sensitivity 95dB +/-3 dB Impedance 32 ohms Bluetooth® Version 4.2 Power Supply Lithium Battery Battery Capacity 200 mAh Receiver Distance max. 10m Charging Time 2 Hours Playing Time 6 Hours 6.FAQ 1. Why is there no power even when the Headphones are turned on? Ans: Ensure the battery has been charged up to 2 hours for initial use. 2. There is no sound during playback. Ans: Check the connection between the headphones and the phone or computer, if the connection is not established, please connect again. Make sure the headphones are paired with your Bluetooth® enabled device. Support If you have problems with your device, please consult the instructions in this manual. Please also visit us on the web at www.naxa.com to get up the minute news, alerts, and documentation for your device. For additional assistance, please contact Naxa Technical Support. NAXA Technical Support 2320 East 49th St. Vernon, CA 90058 http://www.naxa.com/supportcenter/ Keep All Relevant Information for Future Reference.