Naxa NHS-2050 English manual - Page 16

SYMPTOM No power TROUBLESHOOTING GUIDE POSSIBLE CAUSE The adapter is not connected POSSIBLE SOLUTION Connect the adapter to the unit and wall outlet No sound or sound weak The unit is in power off mode Volume level in minimum position Press the Standby/Source button on the unit or press the button on remote control to power on the unit Raise the volume level by pressing the Vol+ button on the unit or the + button on remote control The paired/connected device is not in playback mode Input source incorrect Sound distortion/rattle Volume level too high Remote Control not functioning Bluetooth reception failure Out of working range The battery in the remote control is drained The external device is too far from the unit Have not paired 16 Play music/movie in the paired/ connected device as usual and make sure the volume level of it is in high level Press the button on remote control or press the Standby/Source on the unit to switch to desired mode Reduce the volume level by pressing the Vol- Button on the unit or press the button on remote control Reduce the volume level of the paired/connected device. Point the remote control to the remote sensor on the unit within 16 feet, +/-30 degress Replace with new battery Put the external BT device close to the unit Pair the unit with the BT device as the procedures stated in this manual.