Naxa NHS-5002 Quick Start Guide - Page 4
Bluetooth Operation, Aux In 1 Operation Good, Radio Operation
View all Naxa NHS-5002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
AMAZON LINKPLAY ALEXA VOICE CONTROL Before using Amazon LinkPlay Alexa voice control function, you must create an Amazon account. Create an account on the Amazon website. (www.amazon.com) 1. Touch Amazon on the home screen. A login window will appear. Enter your account information to log in. 2. Press the button once to activate the speaker to communicate before speaking to the speaker (or you must say "ALEXA" to activate the speaker's commincation system without pressing any button). During playback: - Press the button to Play or Pause playback. - Press or to skip forward or backward to a desired track. - Press and hold the VOL- or VOL+ button to adjust the volume. RADIO OPERATION Before using your unit for FM reception, unwrap and fully extend the antenna wire. You may need to adjust the position of the antenna wire for maximum signal strength. Example 1: - Press the communication button. Then ask the speaker, "What's the weather like today?" The speaker will reply, "The weather is not so cold." 1. Plug one end of the adapter into the DC-IN jack of the speaker. Plug the adapter into the wall outlet. Press and hold the STANDBY/MODE button to power on the unit. Waitu until "WIFI" appears on the display. Example 2: - Initiate communication by saying "Alexa". Then you can ask "What's the time now?" The speaker will reply, "It is 8 o'clock now." - Continue to ask the speaker to do other things, such as "Play music". The speaker will reply, "Here is the station we found." Music will then play. 2. Press the MODE button repeatedly until "RADIO" flashes on the display. 3. Press the / WPS button on the unit to seaerch up and down the frequency band. The radio will search for available stations and store them automatically. 4. Press the or button to listen to the stored stations. 3. If you want to stop asking or commanding the speaker, or avoiding external voice interference, press and hold the button to turn off voice input. The communication indicator will turn red. Press and hold again to turn back on. NOTE: Alexa functionality will work in Wi-Fi mode ONLY. BLUETOOTH OPERATION NOTE: Amazon Alexa functionality is not available in this mode. AUX IN 1 OPERATION (Good) 1. Connect the external audio device to the unit with an audio connection cable with 3.5mm stereo mini jacks: APaMiriAngZthOeNspLeaIkNeKr wPitLh ABluYetAooLthEdXevAiceVsO(mICobEileCphOonNeToRr OL music device) 1. Plug one end of the adapter to the DC-IN jack of the speaker. Plug the adapter into the wall outlet. Press and hold the STANDBY/MODE button to power on the unit. Wait until "WIFI" appears on the display. - Insert one end into the mobile phone/external audio device's Line Out or AUX Out jack. - Insert the other end into the AUX-IN jack on the rear of the main unit. NOTE: Be sure to establish the connection properly, as shown below: 2. Press the MODE button repeatedly until the "BT" flashes on the display. Now the unit is in pairing mode. 3. Activate the Bluetooth function on your Bluetooth-enabled device. Please refer to the manufacturer's instructions of your device. 4. Once you have activated Bluetooth on your device, select the speaker name from the pairing list of available Bluetooth devices. NOTE: the pairing name is "NAXA NHS-5002". 5. After successfully pairing, "BT" will stay on the display and you should hear a confirmation tone. 6. If pairing is unsuccessful, turn off the speaker first. Then follow the above steps to pair again. 7. Once you have paired the speaker with a device, the speaker will remember and automatically pair with the connected device when the device's Bluetooth is activated within range. 2. Plug one end of the adapter into the DC-IN jack of the speaker. Plug the adapter into the wall outlet. Press and hold the STANDBY/MODE button to power on the unit. Wait until "WIFI" appears on the display. 3. Press the MODE button repeatedly until "AUX 1" flashes on the display. 4. Play music from your external device. NOTE: Amazon Alexa functionality is not available in this mode. NOTE: Amazon Alexa functionality is not available in this mode. 4