Naxa NPB-262 NPB-262 manual - English - Page 9

To select a desired folder (for MP3 discs, only) To select a track in a folder, press and hold the DIR/MEM/10+ [4] button each time to skip forward a folder, then press the NEXT [13] to select desired track. PROGRAMING TRACKS You can create a custom play list from your disc when playback is stopped. You can program up to 20 tracks for a CD disc and 99 tracks for an MP3 disc 1. While play is stopped, press the PROG/P-MODE button [6]. The display will flash PROG and show "P01". 2. Use the NEXT [13]/PREV [19] buttons to select the first track to be saved to the program list, then press the PROG/P-MODE button [6] to save. The display will now show the next program number (e.g., "P02"). 3. Repeat step 2 to save more tracks to the program list until all tracks have been programmed. 4. Press the PLAY/PAUSE/PAIR button [14] to start playing the program list from the beginning. The display will show which track is currently playing. 5. Press the STOP button [22] on unit to stop program playback. To clear the program, open the CD compartment lid, making sure that the disc has stopped spinning completely before you do so. REPEAT/RANDOM/INTRO PLAY MODE (P-MODE) To change the playback mode, press the PROG/P-MODE button [6] during playback; the display will show the current P-MODE. Modes include repeat, random, and intro.  : Repeat the current track.  DIR: Repeat all of the tracks in the current directory/folder (MP3 playback only).  ALL: Repeat all tracks.  RAN: Play tracks in random order.  INTRO: Play the first 10 seconds of each track. To return to normal playback, press the PROG/P-MODE button [6] until there are no P-MODE indicators on the display. P-MODE is also canceled when you stop playback. 8