Naxa NPB-273 English and Spanish Manual - Page 11

REMOTE CONTROL OPERATION To operate the unit with the remote control, point the remote handset at the remote sensor on the front panel and press the appropriate button on the remote handset. The remote works best within a range of 6 ~ 7 meters from the front panel and on an angle of 30 degrees. Bright sunlight or room light conditions can interfere with the remote control. If the remote operation is unsatisfactory or stops working entirely, first try replacing the remote batteries, then try reducing the room lighting conditions. POWER SOURCE This unit is designed to be operated on AC/DC. AC Operation Plug the smaller end of AC power cord into AC jack on unit and the other bigger end into household AC wall outlet. The batteries will be automatically disconnected. For dual voltage version, make sure that the AC VOLTAGES ELECTOR is switched to your local voltage. DC Operation Open the BATTERY COMPARTMENT DOOR. Install 8 pcs UM-1/D size batteries (not included) into compartment. Please follow correct polarities as indicated. CAUTION Remove batteries if they are exhausted or not being used for a long time. Batteries contain chemical substances, so they should be disposed of properly. BASIC FUNCTION Turning on the unit Press the STANDBY/FUNCTION button on unit or press the STANDBY key on remote control, then press the STANDBY/FUNCTION button on unit or FUNCTION key on remote control to choose FM or AM or BT or TAP or CD or USB mode. Volume adjusting Press the electronic VOLUME UP/DOWN button on unit or on remote control to increase or decrease volume. Press MUTE button on remote control to turn off the sound. Press again to turn on. 11