Naxa NRC-176 English Manual - Page 6

Connecting the Unit to Setting the Clock Power 1. Before plugging in the AC power cord to the AC wall outlet, make sure that the voltage of your electricity supply is same as that indicated on the rating plate. 2. Connect the AC power cord to a wall outlet. Press the On/O button to turn o the unit rst. Press the STOP/adjust button to enter clock setup mode and the time display will begin to ash. Press the button to set the desired hour. The provided power adapter works with AC 120V power. Battery Backup Press the button to set the desired minute. 4. Press the button to con rm the current clock setting. The time display will stop ashing. Battery backup will preserve the current time, alarm settings in the case of power failure or interrupted AC power. Take note of the PM LED indicator when setting the time. 12-Hour / 24-Hour Mode Insert (2) two UM-4 batteries (AAA) into the battery compartment. Be sure to observe the proper po- 1. battery compartment. In STANDBY mode, press and hold the for 2 seconds to select the 12-hour or 24-hour mode. Page 6 Naxa Electronics