Naxa NRC-181 Instruction Manual - Page 12

to reposition the clock to optimize radio reception. Bluetooth® (bt) Mode A Bluetooth enabled device must be paired with the radio before using them together for the first time. After a device has been paired, the radio will automatically connect to it when placed in Bluetooth (bt) mode. 1. Make sure Bluetooth® is enabled on your device. Enable it if it hasn't. 2. Press ALM OFF/SOURCE/POWER until the display reads bt. The radio is now in Bluetooth mode. 3. Use your device to search for available Bluetooth devices (i.e., your radio). This function is usually in the Bluetooth settings menu; refer to your device's instruction manual to learn more 4. The radio will announce itself as "NAXA NRC-181." Select it from the list. 5. The radio will play an ascending tone to indicate that pairing was successful. Start playback on your device. LLIf the pairing process fails, turn the radio off, place it in BT mode again, and repeat steps 1-5. Make sure that the volume of your device is set to its maximum level; then use the radio to adjust the volume to a comfortable level. If your device supports Bluetooth remote functions, you will also be Page 12 Naxa Electronics