Naxa NS-435 NS-435 English Manual - Page 13

C. Mount the unit onto the bracket by aligning the 4

Get Naxa NS-435 PDF manuals and user guides View all Naxa NS-435 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

NS-435 A. Seat the mounting bracket on the stand while making sure that the screw hole positions are aligned with each other (refer to the drawing below). B. Use two of the included screws to fix the bracket to the stand. Mount the unit onto the bracket by aligning the 4 slots on the bottom of the unit with the 4 hooks of the bracket. A. Mark 4 points on the wall and then drill holes at each point. (Use the mounting bracket and a level as a guide when marking the points.) B. Fix the bracket to the wall with 4 screws. C. Mount the unit onto the bracket by aligning the 4 slots on the bottom of the unit with the 4 hooks of the bracket. Note: If mounting onto drywall, you will need to install drywall anchors before screwing the bracket into the wall. 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
12
NS-435
B. Use two of the included screws to fix the bracket to the stand. Mount the unit onto the bracket
by aligning the 4 slots on the bottom of the unit with the 4 hooks of the bracket.
A. Seat the mounting bracket on the stand while making sure that the screw hole positions are
aligned with each other (refer to the drawing below).
A. Mark 4 points on the wall and then drill holes at each point.
(Use the mounting bracket and a level as a guide when
marking the points.)
B. Fix the bracket to the wall with 4 screws.
C. Mount the unit onto the bracket by aligning the 4
slots on the bottom of the unit with the 4 hooks of
the bracket.
Note:
If mounting onto drywall, you will need to install
drywall anchors before screwing the bracket into
the wall.