Netgear 1000 Product Data Sheet - Page 2

Powerline 1000 Essentials Edition Connection Diagram Data Sheet PL1010 Connects to Ethernet port Connexion à un port Ethernet Pick-a-Plug LED Diode « Pick-a-Plug » Push-and-Secure button Bouton « Push-and-Secure » Package Contents • Two (2) Powerline 1000 Adapters (PL1010v2) • Two (2) 2 m (6.5 ft) Ethernet cables • Quick start guide Specifications Warranty • Dimensions: 100 x 59 x 35.9mm (3.9 x 2.3 x 1.4 in) • Weight: 126 g (0.28 lb) • 1000 Mbps† Powerline interface • 10/100/1000 Mbps† Gigabit Ethernet port • Typical coverage up to 500 m2 (5,832 ft2)† • Works with HomePlug AV1 and HomePlug Green PHY devices • IEEE® 802.3 compliant • Power consumption: 3.73W (0.49W in standby mode) • www.netgear.com/about/warranty System Requirements • RJ-45 Ethernet port • Existing electrical wiring and outlets This product comes with a limited warranty that is valid only if purchased from a NETGEAR authorized reseller. * 90-day complimentary technical support following purchase from a NETGEAR authorized reseller. 1 For a complete list of HomePlug AV certified devices, please check www.homeplug.org/certified_products. † Actual data throughput and data over distance will vary. Network conditions and environmental factors, including volume of network traffic, building material and construction, and network overhead, result in lower actual data throughput rate. Outlets must be electrically connected in order for Powerline devices to provide a network connection between them. NETGEAR, and the NETGEAR Logo, are trademarks of NETGEAR, Inc. Mac and the Mac logo are trademarks of Apple Inc. Any other trademarks herein are for reference purposes only. © 2016 NETGEAR, Inc. All rights reserved. NETGEAR, Inc. 350 E. Plumeria Drive, San Jose, CA 95134-1911 USA, www.NETGEAR.com/support D-PL1010v2-0 PAGE 2 OF 2