Home » Netgear Manuals » Bridges & Routers » Netgear AC3600-Nighthawk » Manual Viewer

Netgear AC3600-Nighthawk User Manual - Page 32

Set Up an IPv6 DHCP Internet Connection, Router's IPv6 Address on LAN

View all Netgear AC3600-Nighthawk manuals

Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

Nighthawk X6S AC3600 Tri-Band WiFi Router Model R7960P • Secured. In secured mode, which is the default mode, the router inspects both TCP and UDP packets. • Open. In open mode, the router inspects UDP packets only. 10. Click the Apply button. Your settings are saved. Set Up an IPv6 DHCP Internet Connection To set up an IPv6 Internet connection with a DHCP server: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the router admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Advanced Setup > IPv6. The IPv6 page displays. 5. From the Internet Connection Type menu, select DHCP. The page adjusts. The router automatically detects the information in the following fields: • Router's IPv6 Address on WAN. This field shows the IPv6 address that is acquired for the router's WAN (or Internet) interface. The number after the slash (/) is the length of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no address is acquired, the field displays Not Available. • Router's IPv6 Address on LAN. This field shows the IPv6 address that is acquired for the router's LAN interface. The number after the slash (/) is the length of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no address is acquired, the field displays Not Available. 6. (Optional) In the User Class (If Required) field, enter a host name. Most people can leave this field blank, but if your ISP gave you a specific host name, enter it here. Specify Your Internet Settings 32 User Manual

Section	Page
Contents	3
1. Hardware Setup	9
Unpack Your Router	10
Extend the Antennas	10
LEDs and Buttons on the Top Panel	11
Rear Panel	12
Router Label	13
Position the Router	13
Cable Your Router	15
2. Connect to the Network and Access the Router	16
Connect to the Network	17
Wired Connection	17
WiFi Connection	17
WiFi Connection Using WPS	17
Types of Logins	18
Use a Web Browser to Access the Router	18
Automatic Internet Setup	18
Log In to the Router	20
Install and Manage Your Router With the Nighthawk App	20
Change the Language	21
3. Specify Your Internet Settings	22
Use the Internet Setup Wizard	23
Manually Set Up the Internet Connection	23
Specify an Internet Connection Without a Login	23
Specify an Internet Connection That Uses a Login	25
Specify IPv6 Internet Connections	26
Requirements for Entering IPv6 Addresses	27
Use Auto Detect for an IPv6 Internet Connection	27
Set Up an IPv6 6to4 Tunnel Internet Connection	28
Set Up an IPv6 Pass Through Internet Connection	30
Set Up an IPv6 Fixed Internet Connection	30
Set Up an IPv6 DHCP Internet Connection	32
Set Up an IPv6 PPPoE Internet Connection	33
Use Auto Config for an IPv6 Internet Connection	35
Set Up an IPv6 6rd Internet Connection	36
Manage the MTU Size	38
MTU Concepts	38
Change the MTU Size	40
4. Control Access to the Internet	41
Enable Circle With Disney	42
Enable Circle With Disney On Your Router	43
Enable Circle With Disney Using the Circle App	44
Allow or Block Access to Your Network	44
Use Keywords to Block Internet Sites	45
Block Services From the Internet	47
Delete Keywords From the Blocked List	48
Avoid Blocking on a Trusted Computer	48
Manage Network Access Control Lists	49
Schedule When to Block Internet Sites and Services	50
Set Up Security Event Email Notifications	51
5. Optimize Performance	53
Use Dynamic QoS to Optimize Internet Traffic Management	54
Enable Dynamic QoS	54
Enable or Disable the Automatic QoS Database Update	55
Manually Update the Dynamic QoS Database	55
Participate in Dynamic QoS Analytics	56
Improve Network Connections With Universal Plug and Play	57
Wi-Fi Multimedia Quality of Service	58
6. Manage Network Settings	60
View or Change WAN Settings	61
Set Up a Default DMZ Server	62
Change the Router’s Device Name	63
Change the LAN TCP/IP Settings	63
Specify the IP Addresses That the Router Assigns	65
Disable the DHCP Server Feature in the Router	66
Manage Reserved LAN IP Addresses	67
Reserve an IP Address	67
Edit a Reserved IP Address	68
Delete a Reserved IP Address Entry	68
Use the WPS Wizard for WiFi Connections	69
Specify Basic WiFi Settings	70
Change the WiFi Mbps Settings	71
Change the Transmission Power Control	73
Change the WiFi Password or the WiFi Security	74
Set Up a Guest WiFi Network	75
Control the WiFi Radios	77
Use the WiFi On/Off Button	78
Enable or Disable the WiFi Radios	78
Set Up a WiFi Schedule	79
Specify WPS Settings	79
Set Up the Router as a WiFi Access Point	80
Set Up the Router in Bridge Mode	82
Set Up a Bridge for a Port Group or VLAN Tag Group	83
Set Up a Bridge for a Port Group	83
Set Up a Bridge for a VLAN Tag Group	84
Custom Static Routes	86
Set Up a Static Route	87
Edit a Static Route	88
Delete a Static Route	89
Ethernet Port Aggregation	89
Set Up Ethernet Port Aggregation	89
View or Change the Router Ethernet Port Aggregation Mode	91
Set Up WAN Aggregation to Get Multi-Gig Internet	92
7. Manage Your Router	93
Update the Router Firmware	94
Check for New Firmware and Update the Router	94
Manually Upload Firmware to the Router	95
Change the admin Password	96
Enable admin Password Recovery	96
Recover the admin Password	97
View Information About the Router and the Internet and WiFi Settings	98
Display Internet Port Statistics	99
Check the Internet Connection Status	100
View and Manage Logs of Router Activity	101
View Devices Currently on the Network	102
Monitor Internet Traffic	102
Manage the Router Configuration File	104
Back Up Settings	104
Erase the Settings	104
Restore Configuration Settings	105
Remote Access	106
Set Up Remote Management	106
Use Remote Access	107
Remotely Access Your Router Using the Nighthawk App	107
Disable LED Blinking or Turn Off LEDs	108
Set Your Time Zone	108
Change the NTP Server	109
Return the Router to Its Factory Default Settings	110
Use the Reset Button	110
Erase the Settings	110
8. Share USB Storage Devices Attached to the Router	112
USB Device Requirements	113
Connect a USB Storage Device to the Router	113
Access a Storage Device Connected to the Router From a Windows-Based Computer	114
Map a USB Device to a Windows Network Drive	114
Access a Storage Device That Is Connected to the Router From a Mac	115
Back Up Windows-Based Computers With ReadySHARE Vault	116
Enable FTP Access Within Your Network	116
View or Change Network Folders on a Storage Device	117
Add a Network Folder on a USB Storage Device	118
Edit a Network Folder on a USB Storage Device	119
Manage the ReadyDLNA Media Server	121
Safely Remove a USB Storage Device	121
9. Use Dynamic DNS to Access USB Storage Devices Through the Internet	123
Set Up and Manage Dynamic DNS	124
Set Up FTP Access Through the Internet	124
Your Personal FTP Server	125
Set Up Your Personal FTP Server	125
Set Up a New Dynamic DNS Account	126
Specify a DNS Account That You Already Created	126
Change the Dynamic DNS Settings	127
Access USB Storage Devices Through the Internet	129
Remotely Access a USB Device Using ReadyCLOUD	129
Create a ReadyCLOUD Account	129
Register Your Router With ReadyCLOUD	130
10. Share a USB Printer	132
Install the Printer Driver and Cable the Printer	133
Download the ReadySHARE Printer Utility	133
Install the ReadySHARE Printer Utility	133
Print Using the NETGEAR USB Control Center	134
11. Use VPN to Access Your Network	136
Set Up a VPN Connection	137
Specify VPN Service in the Router	137
Install OpenVPN Software	138
Install OpenVPN Software on Your Windows Computer	138
Install OpenVPN Software on Your Mac Computer	141
Install OpenVPN Software on an iOS Device	142
Install OpenVPN Software on an Android Device	142
Use a VPN Tunnel on Your Windows Computer	143
Use VPN to Access the Router’s USB Device and Media	145
Use VPN to Access Your Internet Service at Home	145
Set Up VPN Client Internet Access in the Router	146
Block VPN Client Internet Access in the Router	146
Use a VPN Tunnel to Access Your Internet Service at Home	147
12. Manage Port Forwarding and Port Triggering	149
Manage Port Forwarding to a Local Server	150
Set Up Port Forwarding to a Local Server	150
Add a Custom Port Forwarding Service	151
Edit a Port Forwarding Service	152
Delete a Port Forwarding Entry	153
Application Example: Make a Local Web Server Public	153
How the Router Implements the Port Forwarding Rule	154
Port Triggering	154
Add a Port Triggering Service	155
Enable Port Triggering	156
Application Example: Port Triggering for Internet Relay Chat	156
13. Troubleshooting	158
Quick Tips	159
Sequence to Restart Your Network	159
Check Ethernet Cable Connections	159
WiFi Settings	159
Network Settings	159
Troubleshoot With the LEDs	160
Standard LED Behavior When the Router Is Powered On	160
Power LED Is Off or Blinking	160
LEDs Never Turn Off	160
Internet or Ethernet Port LEDs Are Off	161
WiFi LED Is Off	161
You Cannot Log In to the Router	161
You Cannot Access the Internet	162
Troubleshoot Internet Browsing	163
Changes Are Not Saved	164
Troubleshoot WiFi Connectivity	164
Troubleshoot Your Network Using the Ping Utility	165
Test the LAN Path to Your Router	165
Test the Path From a Windows-Based Computer to a Remote Device	166
14. Supplemental Information	168
Factory Settings	169