Netgear AFM735 AFM735 Install Guide - Page 1

AFM735_IG_12July10.fm Page 1 Monday, July 12, 2010 12:45 PM Installation Guide eProSafe 100MBaseFX SFP Module AFM735 Install Your Optical Module The 100MBaseFX SFP Module provides a full-duplex 100M bps each direction for Ethernet operation on NETGEAR managed switches. The switch will automatically detect the AFM735, so you can simply plug it into an available module slot. The module can be inserted or removed while the switch is operational. AFM735 Tx Rx Installing a AFM735 Module Insert the module firmly into the slot that supports the SFP interface. The AFM735 supports legacy 62.5/125µm OM1 multimode fiber cables up to 2km. Tx Rx Removing a AFM735 Module Release the module latch by pulling down the handle bar across the module, and pull the module out of the module slot. Standards Wave Length Dimensions (HxWxD) Weight Operating Temperature Storage Temperature Operative relative humidity Operating Distance Connectors Power Consumption MTBF Safety Certification Environmental Compliance Table 1: Technical Specifications IEEE 802.3-2002 100BaseFX 1310nm 0.48" x 2.70" x 0.54" (12.2mm x 68.56mm x 13.70mm) 0.055 lb (25g) 23 -158º F (-5 - 70ºC) -40 ~185 ºF (-40 ~ 85ºC) 5 to 95% @ (25ºC) Up to 2km for the 62.5/125µm MMF LC