Netgear AXM765 Installation Guide - Page 1
Netgear AXM765 Manual
View all Netgear AXM765 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Installation Guide 10GBASE-T/1000BASE-T SFP+ Module Model AXM765 Install the Module Insert the module firmly into a slot that supports the SFP+ interface. Make sure that the cable you use is Category 5e (Cat 5e) or higher rated Ethernet cable (Cat 6, Cat 6a, or Cat 7). The AXM765 SFP+ module is a low-power, high-performance, multi-gigabit 10G/1000BASE-T transceiver. The AXM765 delivers 10 Gb network connectivity with cabling up to 98.5 feet (30 meters) and delivers 1G network connectivity speed through 328 feet (100 meters) of Category 5e (Cat 5e) or Cat 6 Ethernet cable. The module is compatible with the IEEE 802.3an/ab standard. The switch automatically detects the module, so you can simply plug it into an available module slot. You can insert or remove the module while the switch is operational. Remove the Module 1. To release the module latch, pull up the handle bar across the module. 2. Pull the module out of the module slot. Technical Specifications Standards Dimensions (H x W x D) Weight Operating temperature Operative relative humidity Operating distance Connectors Power consumption Safety certification Environmental compliance IEEE 802.3an, IEEE 802.3ab, SFF-8431 and SFF-8432 MSA-compliant 0.53 in. x 0.53 in. x 2.57 in. (13.7 mm x 13.4 mm x 65.4 mm) 0.5 oz (14.17 g) 32-158ºF (0-70ºC) 85% at 77ºF (25ºC) 10GBASE-T up to 98.5 ft (30 m) with Cat 6a (or higher rated) Ethernet cable 1GBASE-T up to 328 ft (100 m) of Cat 5e (or higher rated) Ethernet cable RJ45 2.5W IEC/EN 60950-1, UL60950 RoHS