Netgear CBR750 Installation Guide - Page 1

Quick Start Guide Model CBR750 BEFORE RETURNING THIS PRODUCT TO THE STORE FOR ANY REASON, call NETGEAR Technical Support at 1-866-534-9377. Set up and activate using the NETGEAR Orbi app Set up your Orbi cable modem router and activate your Internet service with the NETGEAR Orbi app. Note: Do not attempt to mount or hang your cable modem router on the wall or ceiling. Doing so might create a hazardous situation and might damage your cable modem router, which might not be covered by NETGEAR's warranty. If you do not want to use the NETGEAR Orbi app, set up your cable modem router using the instructions in Set up and activate using the cable modem router web interface on page 3. 1. Scan a QR code or search for NETGEAR Orbi in the Apple App Store or Google Play Store. 2. Download and launch the NETGEAR Orbi app on your mobile device and follow the prompts. Set up and activate using the cable modem router web interface 1. Turn off and disconnect existing modems and routers. If you are replacing a modem that is currently connected in your home, unplug the modem and plug the new cable modem router into the same outlet. 2. Use a coaxial cable to connect the coaxial cable connector on the cable modem router to the cable wall outlet. We recommend connecting directly to the cable wall outlet. If you must share the connection, use a 3.5dB (1 to 2) splitter. 3. Connect the power adapter to the cable modem router and plug the power adapter into an electrical outlet. The startup procedure takes about one minute. When it is complete, the Power LED lights solid white. 4. Wait for the Online LED to light solid white. This process might take up to 10 minutes. Note: When the Online LED lights, your cable modem router is still not connected to the Internet. You must activate your cable modem router with your ISP. 5. Connect your computer or mobile device to the Orbi cable modem router with WiFi or Ethernet: • WiFi. Use the WiFi network name (SSID) and password on the cable modem router label to connect. • Ethernet. Use an Ethernet cable to connect a computer to an Ethernet port on the cable modem router. (The computer must have an Ethernet port.) 6. Launch a web browser and set up your cable modem router. You are automatically redirected to the cable modem router web interface. If you're not redirected,, enter orbilogin.com or 192.168.1.1 in the address field of the web browser. Follow the prompts. You are asked to do the following: • Agree to the Terms and Conditions. • Change your modem router's admin credentials and set up security questions. • Set up your WiFi network name and password. 7. Make sure that you can log in to the cable modem router web interface after the setup. In a new web browser window, enter orbilogin. com or 192.168.1.1 and then enter the cable modem router admin user name and password. If the BASIC Home page displays, you are ready to activate your Internet service. 9. Activate your Internet service. Collect the following information before starting to activate your internet service: • Your ISP account information • Cable modem router model number, which is CBR750 • Cable modem router serial number • Cable modem router MAC address Your cable modem router's serial number and MAC address are on the cable modem router label. The following table lists contact information for ISPs that support your cable modem router. Cable Internet Provider Activation contact Cox Mediacom Optimum Sparklight Spectrum Xfinity 1-888-556-1193 1-855-Mediacom (1-855-633-4226) 1-877-810-6750 1-877-692-2253 1-833-267-6094 http://xfinity.com/activate (Follow the prompts to activate.) Note: Your ISP's contact information might change. You can also find the contact information in your monthly Internet service billing statement. July 2020