Netgear CM1150V Installation Guide - Page 1

Netgear CM1150V Manual

Page 1 highlights

Support and Community Visit netgear.com/support to get your questions answered and access the latest downloads. You can also check out our NETGEAR Community for helpful advice at community.netgear.com. Customer-owned cable devices might not be compatible with certain cable networks. Check with your cable Internet provider to confirm that this NETGEAR cable device is allowed on your cable network. If you are experiencing trouble installing your cable modem, contact NETGEAR at 1-866-874-8924. Regulatory and Legal For regulatory compliance information including the EU Declaration of Conformity, visit https://www.netgear.com/about/regulatory/. See the regulatory compliance document before connecting the power supply. For NETGEAR's Privacy Policy, visit https://www.netgear.com/about/privacy-policy. By using this device, you are agreeing to NETGEAR's Terms and Conditions at https://www.netgear.com/about/terms-and-conditions. If you do not agree, return the device to your place of purchase within your return period. Note to CATV system Installer: This reminder is provided to call the CATV systems installer's attention to Section 820-93 of the National Electrical Code, which provides guidelines for proper grounding and, in particular, specifies that coaxial cable shield shall be connected to the grounding system of the building as close to the point of cable entry as practical. Cable modem LEDs LED Description Power • Solid green. The cable modem is receiving power and is functioning normally. • Off. The cable modem is not receiving power. • Solid red. The cable modem is too warm and might overheat. Downstream • Solid amber. One downstream channel is locked. • Solid green. Two or more downstream channels are locked. • Blinking green. The cable modem is scanning for a downstream channel. • Off. No downstream channel is locked. Upstream • Solid amber. One upstream channel is locked. • Solid green. Two or more upstream channels are locked. • Blinking green. The cable modem is scanning for an upstream channel. • Off. No upstream channel is locked. Online • Solid green. The cable modem is online. • Blinking green. The cable modem is synchronizing with the cable provider's cable modem termination system (CMTS). • Off. The cable modem is offline. LAN (1-4) • Solid green. A powered-on device is connected to this port at 1000 Mbps. • Blinking green. This port is sending or receiving traffic at 1000 Mbps. • Solid amber. A powered-on device is connected to this port at either 100 Mbps or 10 Mbps. • Blinking amber. This port is sending or receiving traffic at either 100 Mbps or 10 Mbps. • Off. No device is connected to this port. Tel 1 and Tel 2 • Solid green. The Tel 1 or Tel 2 port is online. • Blinking green. The Tel 1 or Tel 2 port is processing a call or the phone is off-hook. • Off. The Tel 1 or Tel 2 port is not in use. © NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non‑NETGEAR trademarks are used for reference purposes only. Quick Start Voice Cable Modem Model CM1150V Package contents Cable modem Phone cable Ethernet cable Power adapter BEFORE RETURNING THIS PRODUCT TO THE STORE FOR ANY REASON, call NETGEAR Technical Support at 1-866-534-9377 or visit https://kb.netgear.com/000061156/How-can-I-troubleshoot-my-cable-modem.

  • 1
  • 2

Quick Start
Voice Cable Modem
Model CM1150V
Package contents
Cable modem
Ethernet
cable
Power
adapter
BEFORE RETURNING THIS PRODUCT TO THE STORE
FOR ANY REASON, call NETGEAR Technical Support at
1-866-534-9377 or visit
.
Cable modem LEDs
LED
Description
Power
Solid green
. The cable modem is receiving power and is functioning
normally.
Off
. The cable modem is not receiving power.
Solid red
. The cable modem is too warm and might overheat.
Downstream
Solid amber
. One downstream channel is locked.
Solid green
. Two or more downstream channels are locked.
Blinking green
. The cable modem is scanning for a downstream channel.
Off
. No downstream channel is locked.
Upstream
Solid amber
. One upstream channel is locked.
Solid green
. Two or more upstream channels are locked.
Blinking green
. The cable modem is scanning for an upstream channel.
Off
. No upstream channel is locked.
Online
Solid green
. The cable modem is online.
Blinking green
. The cable modem is synchronizing with the cable
provider’s cable modem termination system (CMTS).
Off
. The cable modem is offline.
LAN (1–4)
Solid green
. A powered-on device is connected to this port at 1000 Mbps.
Blinking green
. This port is sending or receiving traffic at 1000 Mbps.
Solid amber
. A powered-on device is connected to this port at either 100
Mbps or 10 Mbps.
Blinking amber
. This port is sending or receiving traffic at either 100
Mbps or 10 Mbps.
Off
. No device is connected to this port.
Tel 1 and Tel 2
Solid green
. The Tel 1 or Tel 2 port is online.
Blinking green
. The Tel 1 or Tel 2 port is processing a call or the phone is
off-hook.
Off
. The Tel 1 or Tel 2 port is not in use.
Phone
cable
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any
non-NETGEAR trademarks are used for reference purposes only.
Visit
netgear.com/support
to get your questions answered and access the latest
downloads.
You can also check out our NETGEAR Community for helpful advice at
community.netgear.com
.
Customer-owned cable devices might not be compatible with certain cable
networks. Check with your cable Internet provider to confirm that this NETGEAR
cable device is allowed on your cable network.
If you are experiencing trouble installing your cable modem, contact NETGEAR at
1-866-874-8924.
Support and Community
Regulatory and Legal
For regulatory compliance information including the EU Declaration of Conformity, visit
.
See the regulatory compliance document before connecting the power supply.
For NETGEAR’s Privacy Policy, visit
.
By using this device, you are agreeing to NETGEAR’s Terms and Conditions at
. If you do not agree, return the device to your
place of purchase within your return period.
Note to CATV system Installer: This reminder is provided to call the CATV systems installer’s attention
to Section 820-93 of the National Electrical Code, which provides guidelines for proper grounding
and, in particular, specifies that coaxial cable shield shall be connected to the grounding system of the
building as close to the point of cable entry as practical.