Netgear DM111PSPv2 DM111PSPv2 Installation Guide - Page 2

Manual Installation (Linux, Mac, or PC with No CD Drive) 1. Follow Steps 1--3 to connect the DM111PSP modem to your computer. 2. Check that the Power LED is green, and if it is not, power on the router and wait for the Power LED to turn green. Set up Internet Connectivity 1. Type http://www.routerlogin.net in the web browser address bar. Press Enter. 2. Type admin for the user name and password for the password. Click OK. 3. Select Setup Wizard in the top-left corner and make sure Yes is selected under Auto-Detect Connection Type. Click Next to complete the Setup Wizard. 4. Select Basic Settings to see your settings. Declaration of Conformity For complete DoC please visit the NETGEAR EU Declarations of Conformity website at: http://kb.netgear.com/app/answers/detail/a_id/11621/. For GNU General Public License (GPL) related information, please visit http://support.netgear.com/app/answers/detail/a_id/2649/. Note: If your Internet service provider (ISP) requires you to log in, enter your ISP login information when prompted. The ISP login is not the same as the router login. If you do not have your ISP login information, contact your ISP and record it here: ISP user name ISP password July 2011 This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union, this product should be treated and recycled in accordance with the laws of your jurisdiction implementing the WEEE Directive. ©2010 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered trademarks of NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice.