Netgear DM111Pv2 DM111Pv2 Setup Manual - Page 7

Table 1., LED Descriptions continued, Internet, Label, Activity, Description - bridge

Page 7 highlights

Table 1. LED Descriptions (continued) Label 3) ADSL Activity Solid Green Blink (Green) Off Solid Green 4) Internet Off Blink (Green) Red Description The ADSL port is synchronized with the DSLAM. The ADSL port is in the process of synchronizing with the DSLAM. Note: Per TR-068: Blink at 2 Hz with a 50% duty cycle when trying to detect carrier signal, blink at 4 Hz with a 50% duty cycle when the carrier has been detected and the modem is trying to train. No link is detected on the ADSL port or the modem is powered off. IP is connected. The device has a WAN IP address from IPCP or DHCP and ADSL is up or a static IP address is configured, PPP negotiation -if used-has successfully completed, and no traffic detected. If the IP or PPPoE session is dropped due to an idle time-out, the light will remain green if an ADSL connection is still present. If the session is dropped for any other reason, the light is turned off. The light will turn red when it attempts to reconnect and the DHCP or PPPoE fails (see below). Modem power off, modem in bridged mode, or ADSL connection not present. IP is connected and IP traffic is passing through the device in either direction. Device attempted to become IP connected and failed (no DHCP response, no PPPoE response, PPPoE authentication failed, no IP address from IPCP, and so on.) For bridged mode, the indicator light must be off. Connecting the Router to the Internet 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

Connecting the Router to the Internet
3
3) ADSL
Solid Green
The ADSL port is synchronized with the DSLAM.
Blink (Green)
The ADSL port is in the process of synchronizing with the DSLAM.
Note: Per TR-068: Blink at 2 Hz with a 50% duty cycle when trying to
detect carrier signal, blink at 4 Hz with a 50% duty cycle when the
carrier has been detected and the modem is trying to train.
Off
No link is detected on the ADSL port or the modem is powered off.
4) Internet
Solid Green
IP is connected. The device has a WAN IP address from IPCP or
DHCP and ADSL is up or a static IP address is configured, PPP
negotiation —if used—has successfully completed, and no traffic
detected.
If the IP or PPPoE session is dropped due to an idle time-out, the
light will remain green if an ADSL connection is still present. If the
session is dropped for any other reason, the light is turned off. The
light will turn red when it attempts to reconnect and the DHCP or
PPPoE fails (see below).
Off
Modem power off, modem in bridged mode, or ADSL connection not
present.
Blink (Green)
IP is connected and IP traffic is passing through the device in either
direction.
Red
Device attempted to become IP connected and failed (no DHCP
response, no PPPoE response, PPPoE authentication failed, no IP
address from IPCP, and so on.)
For bridged mode, the indicator light must be off.
Table 1.
LED Descriptions (continued)
Label
Activity
Description