Netgear EX2800 Installation Guide - Page 1
Netgear EX2800 Manual
View all Netgear EX2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
LED descriptions LED Power Router Device WPS Description • Blinking green. The extender is booting. • Solid green. The extender is powered on. • Off. The extender is powered off. This LED indicates the WiFi connection between the extender and the router. • Solid green. Best connection. • Solid amber. Good connection. • Solid red. Poor connection. • Off. No connection. This LED indicates the WiFi connection between your computer or mobile device and the extender: • Solid green. Best connection. • Solid amber. Good connection. • Solid red. Poor connection. • Off. No connection. • Blinking green. A WPS connection is being established. • Solid green. The extended network is enabled with WiFi security (either WPA or WPA2). • Off. The extended network is enabled without WiFi security. Log in to the extender After installation, you can log in to the extender to view or change the extender's settings. 1. Launch a web browser from a computer or mobile device that is connected to your extender network. When you are connected to the extender, the Device LED lights. 2. Log in to your extender: • If your extender and router use different WiFi network names (SSIDs), visit www.mywifiext.net. • If your extender and router use the same WiFi network name (SSID), enter http://