Netgear EX6200 Installation Guide - Page 2

Hardware - manual

Page 2 highlights

Hardware Front panel EX6200 WiFi Range Extender AC1200 High Power Dual Band Gigabit Ports Installation Guide Rear panel 5 dBi external antennas 2.4 GHz Link Rate LED 5 GHz Link Rate LED Device to Extender LED LAN LEDs USB LED USB 3.0 port WPS button Reset button Power input LAN ports Power button Indicator LEDs 2.4 GHz Link Rate LED Solid green. Best connection Solid amber. Good connection Solid red. Poor connection Off. No connection 5 GHz Link Rate LED Solid green. Best connection Solid amber. Good connection Solid red. Poor connection Off. No connection Device to Extender LED Solid green. The extender and device are connected. LAN LEDs Solid green. The LAN port has detected an Ethernet link with the extender. USB LED Solid green. A USB device is connected to the extender. Support After installing your extender, locate the serial number on the label and use it to register your product at https://my.netgear.com. You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR website. For product updates and web support, visit http://support.netgear.com. You can get the user manual online at http://downloadcenter.netgear.com or through a link in the product's user interface. NETGEAR recommends that you use only the official NETGEAR support resources. For the current EU Declaration of Conformity, visit: http://support.netgear.com/app/answers/detail/a_id/11621/. For regulatory compliance information, visit http://www.netgear.com/about/regulatory/. See the regulatory compliance document before connecting the power supply. NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change without notice. Other brand and product names are registered trademarks or trademarks of their respective holders. © NETGEAR, Inc. All rights reserved. NETGEAR, Inc. 350 East Plumeria Drive, San Jose, CA 95134 USA January 2014

  • 1
  • 2

Rear panel
WPS button
LAN ports
Reset button
Power button
Power input
5 dBi external antennas
Hardware
Front panel
2.4 GHz Link Rate LED
5 GHz Link Rate LED
Device to Extender LED
LAN LEDs
USB LED
USB 3.0 port
Support
After installing your extender, locate the serial number on the label and use it to register your product at
. You must register your product
before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR website.
For product updates and web support, visit
.
You can get the user manual online at
or through a link in the product’s user interface.
NETGEAR recommends that you use only the official NETGEAR support resources.
For the current EU Declaration of Conformity, visit:
.
For regulatory compliance information, visit
.
See the regulatory compliance document before connecting the power supply.
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United
States and/or other countries. Information is subject to change without notice. Other brand and product names are registered trademarks or trademarks of their
respective holders. © NETGEAR, Inc. All rights reserved.
NETGEAR, Inc. 350 East Plumeria Drive, San Jose, CA 95134 USA
January 2014
Indicator LEDs
2.4 GHz Link Rate LED
Solid green
. Best connection
Solid amber
. Good connection
Solid red
. Poor connection
Off
. No connection
5 GHz Link Rate LED
Solid green
. Best connection
Solid amber
. Good connection
Solid red
. Poor connection
Off
. No connection
Device to Extender LED
Solid green
. The extender and device are
connected.
LAN LEDs
Solid green
. The LAN port has detected an
Ethernet link with the extender.
USB LED
Solid green
. A USB device is connected to
the extender.
EX6200 WiFi Range Extender
AC1200 High Power Dual Band Gigabit Ports
Installation Guide