Netgear FA311v2 FA311v2 Installation Guide - Page 2

Technical Specifications Standards Compatibility Interface Options Dimensions Environmental Specifications Agency Compliance IEEE 802.3U Fast Ethernet IEEE 802.3 Ethernet IEEE 802.3U Auto Negotiation Autosensing PCI Plug and Play 2.1 or 2.2 Compatible RJ-45 Connector Dimensions: 5.7 x 3.7 in (14.4 x 9.3 cm) Weight: 0.20 lbs (90 g) Operating Temperature: 0 to 40 degrees C Operating Humidity: 10% to 90% noncondensing CE Mark FCC, Part 15, Class B EN 55 022 (CISPR 22) Class B Canada ICES-003, Class B VCCI Class B Technical Support Locate the serial number on the bottom label of your product and use it to register your product at http://www.NETGEAR.com/register. Registration on the Web site or over the phone is required before you can use our telephone support service. The phone numbers for worldwide regional customer support centers are on the Warranty and Support Information card that came with your product. Go to http://kbserver.netgear.com for product updates and Web support. Phone: 1-888-NETGEAR, for US & Canada only. For other countries, see your Support information card. E-mail: [email protected] "Class B" Equipment (Household purpose info/telecommunications equipment): As this equipment has undergone EMC registration for household purposes, this product can be used in any area including residential areas. This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union, this product should be treated and recycled in accordance with the laws of your jurisdiction implementing the WEEE Directive. © 2006 by NETGEAR, Inc. All rights reserved. NETGEAR is a registered trademark of Netgear, Inc. in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. April 2007