Netgear FS728TS FS752TS Hardware manual - Page 26

FS700TS Hardware Installation Guide Table 3-1. Port LEDS - Non-LED Devices (continued) Port LED Designation 4-Gigabits Copper Ports - Left LED Link/ACT/SPD Two LED's/Port on Jack LED: 2-SFP Ports - One LED/ Port Right LED Stack LED (Combo port group/ Copper port group): SFP Link/ACT LED • Off - No 10/100/1000Mbps link is established on the port. • Solid Green - A valid 1000Mbps link is established on the port. • Solid Yellow - A valid 10/100Mbps link is established on the port. • Flashing Green - Packet transmission or reception is occurring on the port at 1000Mbps. • Flashing Yellow - Packet transmission or reception is occurring on the port at 10/100Mbps. • Off - Stack port does not have a valid link connection. • Green - Stack port has a valid link connection. • Off - No link is established on the port. • Solid Green - A valid link is established on the port. • Flashing Green - Packet transmission or reception is occurring on the port. Table 3-2. Port LEDs - PoE Devices Port LED 48-10/100M Ports - One Link/ACT/SPD LED LED/Port (Ethernet Mode) Designation • Off - No 10/100Mbps link is established on the port. • Solid Green - A valid 100Mbps link is established on the port. • Flashing Green - Packet transmission or reception is occurring on the port at 100Mbps. • Solid Yellow - A valid 10Mbps link is established on the port. • Flashing Yellow - Packet transmission or reception is occurring on the port at 10Mbps. 3-23 v1.0, September 2007 Physical Description