Netgear FS750NA FS750 Reference Manual - Page 27
Installing the Switch, Installing the Switch on a Flat Surface, Installing the Switch in a Rack
View all Netgear FS750NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Installing the Switch You can install the NETGEAR FS726 and FS750 Switches on a flat surface or in a standard 19-inch rack. Installing the Switch on a Flat Surface 1. The switch ships with four self-adhesive rubber footpads. Affix one rubber footpad on each of the four concave spaces on the bottom of the switch. The rubber footpads cushion the switch against shock/vibrations. MODEL Figure 4-1. Attaching Mounting Brackets Installing the Switch in a Rack To install the FS726 or FS750 Switch in a rack, use the following procedure (and refer to Figure 4-1). To perform this procedure, you need the 19-inch rack-mount kit supplied with your switch. 1. Attach the supplied mounting brackets to the side of the switch. 2. Insert the screws provided in the rack-mount kit through each bracket and into the bracket mounting holes in the switch. 3. Tighten the screws with a #1 Phillips screwdriver to secure each bracket. 4. Align the mounting holes in the brackets with the holes in the rack, and insert two pan-head screws with nylon washers through each bracket and into the rack. 5. Tighten the screws with a #2 Phillips screwdriver to secure the switch in the rack. 6. Proceed to "Connecting Devices to the Switch." installation 4-3