Netgear FS750T FS726T User Manual - Page 12

For a Network without a DHCP Server, Discover, Configuration Setting, Disable, Web Access - default ip

Get Netgear FS750T - Switch PDF manuals and user guides
UPC - 606449035094
View all Netgear FS750T manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

Smart Switch Series Software Manual For a Network without a DHCP Server 1. Connect your switch to your existing network. 2. Power on your switch by plugging in the power cord. 3. The default IP is 192.168.0.239. 4. Install the Smartwizard Discovery program on your PC. 5. Start the Smartwizard Discovery utility. 6. Click Discover to find your switch. 7. Click Configuration Setting. Figure 3-4: Assigning the switch a static IP address 8. Choose Disable on DHCP. 9. Enter your IP address, Gateway and Subnet. Then, type your password and click Set. Make sure your PC and your switch are in the same subnet. Note: You can always assign a Static IP address to your switch no matter if your network has a DHCP server or not. 10. Select your switch by clicking on it. Then click Web Access. 3-3 Getting Started July 2005

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
Smart Switch Series Software Manual
3-3
Getting Started
July 2005
For a Network without a DHCP Server
1.
Connect your switch to your existing network.
2.
Power on your switch by plugging in the power cord.
3.
The default IP is 192.168.0.239.
4.
Install the Smartwizard Discovery program on your PC.
5.
Start the Smartwizard Discovery utility.
6.
Click
Discover
to find your switch.
7.
Click
Configuration Setting
.
Figure 3-4:
Assigning the switch a static IP address
8.
Choose
Disable
on DHCP.
9.
Enter your IP address, Gateway and Subnet. Then, type your password and click
Set
. Make
sure your PC and your switch are in the same subnet.
Note:
You can always assign a Static IP address to your switch no matter if your network has a
DHCP server or not.
10.
Select your switch by clicking on it.
Then click
Web Access
.