Netgear FS752TS FS752TS Hardware manual - Page 18
Checking the Installation
UPC - 606449043563
View all Netgear FS752TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
FS700TS Hardware Installation Guide 5. Tighten the screws with a #2 Phillips screwdriver to secure the switch in the rack. Figure 2-1 Note: Always install devices from the bottom of the to the top. This will prevent the rack from over balancing and toppling over. Checking the Installation Before applying power perform the following: • Inspect the equipment thoroughly. • Verify that all cables are installed correctly. • Check cable routing to make sure cables are not damaged or creating a safety hazard. • Ensure all equipment is mounted properly and securely. 2-31 v1.0, September 2007 Installation
FS700TS Hardware Installation Guide
2-31
Installation
v1.0, September 2007
5.
Tighten the screws with a #2 Phillips screwdriver to secure the switch in the rack.
Checking the Installation
Before applying power perform the following:
•
Inspect the equipment thoroughly.
•
Verify that all cables are installed correctly.
•
Check cable routing to make sure cables are not damaged or creating a safety hazard.
•
Ensure all equipment is mounted properly and securely.
Figure 2-1
Note:
Always install devices from the bottom of the to the top. This will prevent the rack
from over balancing and toppling over.