Netgear FSM7352S FSM7328PS Command line reference manual - Page 345
set slot disable, set slot power
UPC - 606449038880
View all Netgear FSM7352S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 345 highlights
Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches, 17.1.9 set slot disable This command configures the administrative mode of the slot(s). If you specify [all], the command is applied to all slots, otherwise the command is applied to the slot identified by . If a card or other module is present in the slot, this administrative mode will effectively be applied to the contents of the slot. If the slot is empty, this administrative mode will be applied to any module that is inserted into the slot. If a card is disabled, all the ports on the device are operationally disabled and shown as "unplugged" on management screens. Format set slot disable [ | all] Mode Global Config 17.1.9.1 no set slot disable This command unconfigures the administrative mode of the slot(s). If you specify [all], the command removes the configuration from all slots, otherwise the configuration is removed from the slot identified by . If a card or other module is present in the slot, this administrative mode removes the configuration from the contents of the slot. If the slot is empty, this administrative mode removes the configuration from any module inserted into the slot. If a card is disabled, all the ports on the device are operationally disabled and shown as "unplugged" on management screens. Format no set slot disable [ | all] Mode Global Config 17.1.10 set slot power This command configures the power mode of the slot(s) and allows power to be supplied to a card located in the slot. If you specify [all], the command is applied to all slots, otherwise the command is applied to the slot identified by . Use this command when installing or removing cards. If a card or other module is present in this slot, the power mode is applied to the contents of the slot. If the slot is empty, the power mode is applied to any card inserted into the slot. Format set slot power [ | all] Mode Global Config Stacking Commands v3.0, January 2008 17-5