Netgear FSM750S FSM726 User Manual - Page 30
Main Menu> Set-Up> GBIC, Main Menu> Tools - factory reset
View all Netgear FSM750S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
700 Series Managed Switch User's Guide for Software v2.1 Gigabit Ports. For the gigabit ports on each switch, the port type may be chosen. The default is that the port uses the RJ-45 interface (GT). You can select the GBIC interface (GB) by switching the port type from 'GT' to 'GB'. This can be done by hitting the space bar when the cursor is on the port number. Note: enabling the GBIC connector for a Gigabit Ethernet port disables the built-in 1000BASE-T port. GBIC ports do not support Auto Negotiation. You must manually configure the GBIC port. The default values are 1000 Mbps, full duplex. Main Menu> Set-Up> GBIC On this page, you can set up the port characteristics related to GBIC or copper media. Figure 4-13: GBIC Port Configuration All of the parameters on this page are toggle settings. To change, or toggle, between options, hit Ctrl-M to move the curser to the ports field and simply strike the space bar when the appropriate option is highlighted. Main Menu> Tools These system tools are provided: • Save Configuration to NVRAM • Restore Factory Values • Reset Switch 4-10 Administration Console Telnet Interface SM-10004-02