Netgear FVG318 FVG318 Reference Manual - Page 161
Viewing and Editing the VPN Parameters, admin, password, Scenario_1
UPC - 606449041668
View all Netgear FVG318 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
ProSafe 802.11g Wireless VPN Firewall FVG318 Reference Manual - Subnet Mask: 255.255.255.0 (in this example) 3. Log in to the FVG318 labeled Gateway B. Log in at the default address of http://192.168.0.1 with the default user name of admin and default password of password (or using whatever password and LAN address you have chosen). Note: Based on the network addresses used in this example, you would log in to the LAN IP address of http://172.23.9.1 at Gateway B 4. Repeat the process using the VPN Wizard to configure the FVG318 at Gateway B. • Connection Name: Scenario_1 (in this example) • Pre-Shared Key: 12345678 (in this example), must be the same at both VPN tunnel endpoints • Remote WAN IP address: 14.15.16.17 (in this example), must be unique at each VPN tunnel endpoint • Remote LAN IP Subnet - IP Address: 10.5.6.1 (in this example), must be unique at each VPN tunnel endpoint - Subnet Mask: 255.255.255.0 (in this example) All traffic from the range of LAN IP addresses specified on FVG318 A and FVG318 B will now flow over a secure VPN tunnel once the VPN tunnel is initiated (see "Initiating and Checking the VPN Connections" on page C-6). Viewing and Editing the VPN Parameters The VPN Wizard sets up a VPN tunnel using the default parameters from the VPN Consortium (VPNC). • The Pre-Shared Key must be the same at both VPN tunnel endpoints. • The remote WAN and LAN IP addresses for one VPN tunnel endpoint will be the local WAN and LAN IP addresses for the other VPN tunnel endpoint. • The VPN Wizard ensures the other VPN parameters are the same at both VPN tunnel endpoints. VPN Configuration of NETGEAR FVG318 C-5 v1.0, September 2007