Netgear GS108Tv1 GS108T Hardware Installation Guide - Page 13

GS108T Smart Switch Hardware Installation Guide • Embedded HTTP server for Web-based management • Supports port-setting function, enabling user to enable/disable each port, and set speed, duplex mode and device flow control • Auto-Discovery support with application program for discovering and managing the smart switches on the network • Flash upgrade, configuration backup/restore, and factory reset • Full compatibility with IEEE standards: • IEEE 802.3i (10BASE-T) • IEEE 802.3u (100BASE-TX) • IEEE 802.3z/ab (1000BASE-X, 1000Base-T) • IEEE 802.3x (full-duplex flow control) • Auto-sense and auto-negotiate for all ports • Auto Uplink™ on all ports for the right connection sense • Integrated address Look-Up Engine supports 8K absolute MAC addresses • Full- and half-duplex functions for all 10/100/1000 ports • Store-and-Forward transmission to remove bad packets from the network • Active flow control to minimize packet loss/frame drops: • Half-duplex back-pressure control • Full-duplex IEEE 802.3x pause frame flow control • LED indicators for port status monitoring: • Power LED indicates power on/off status • Link/Act LED indicates link status and activity • Flexible installation: • Standalone desktop installation Introduction 1-3 v1.1, April 2010