Netgear GS108Tv1 GS108Tv1 Installation Guide - Page 2

Technical Support - default password

Get Netgear GS108Tv1 - Gigabit Smart Switch PDF manuals and user guides View all Netgear GS108Tv1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 2 highlights

5. Enter the default password of password in lower case letters and click Login. The System > Management screen will display. Consult the Resource CD or the on-line link to the Reference Manual by selecting Help > User Guide for assistance with configuration procedures. The Smartwizard Discovery utility finds the switch and displays its MAC Address, IP Address, and model number. If you cannot configure your switch, verify that the IP address configuration of the PC is in the same subnet as the switch. If they are not on the same subnet, click Configuration Setting and enable DHCP. 3. Click to select the line displaying the details of your switch. If there are multiple smart switches in your network, be sure to select the one you want to configure. 4. Click Web Access to view the switch Login screen. November 2007 Select from the configuration menu options to configure the switch for your network. Troubleshooting Tips Following are some tips to correct simple problems that might occur. Be sure to power on your PC and smart switch in the correct sequence. Follow this sequence. Turn off the smart switch and computer. First, turn on the smart switch and wait two minutes. Next turn on the computer. Make sure the Ethernet cables are securely plugged in. For each powered on computer connected to the smart switch with a securely plugged in Ethernet cable, the corresponding smart switch LAN port status light will be lit. Make sure the network settings of the computer are correct. In most cases, computers should be configured to obtain an IP address automatically via DHCP. If your network uses static IP addresses, be sure the switch and computer are configured with valid IP addresses. Technical Support Thank you for selecting NETGEAR products. After completing setup and configuration, locate the serial number on the bottom label of the Smart Switch and use it to register your product at http://www.netgear.com/register. Registration on the web site or over the phone is required before you can use our telephone support service. The phone numbers for worldwide regional customer support centers are on the Warranty and Support Information card that came with your product. Go to http://www.netgear.com/support for product updates and web support. This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union, this product should be treated and recycled in accordance with the laws of your jurisdiction implementing the WEEE Directive. © 2007 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered trademarks of NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice.

  • 1
  • 2
November 2007
This symbol was placed in accordance with the European Union
Directive 2002/96 on the Waste Electrical and Electronic Equipment (the
WEEE Directive). If disposed of within the European Union, this
product should be treated and recycled in accordance with the laws of
your jurisdiction implementing the WEEE Directive.
© 2007 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered trademarks of NETGEAR,
Inc. in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their
respective holders. Information is subject to change without notice.
The Smartwizard Discovery utility finds the switch and displays its MAC
Address, IP Address, and model number. If you cannot configure your switch,
verify that the IP address configuration of the PC is in the same subnet as the
switch. If they are not on the same subnet, click
Configuration Setting
and
enable DHCP.
3.
Click to select the line displaying the details of your switch. If there are
multiple smart switches in your network, be sure to select the one you want to
configure.
4.
Click Web Access to view the switch Login screen.
5.
Enter the default password of
password
in lower case letters and click
Login
.
The System > Management screen will display. Consult the
Resource CD
or
the on-line link to the
Reference Manual
by selecting Help > User Guide for
assistance with configuration procedures.
Select from the configuration menu options to configure the switch for your
network.
Troubleshooting Tips
Following are some tips to correct simple problems that might occur.
Be sure to power on your PC and smart switch in the correct sequence.
Follow this sequence. Turn off the smart switch and computer. First, turn on
the smart switch and wait two minutes. Next turn on the computer.
Make sure the Ethernet cables are securely plugged in.
For each powered on computer connected to the smart switch with a securely
plugged in Ethernet cable, the corresponding smart switch LAN port status
light will be lit.
Make sure the network settings of the computer are correct.
In most cases, computers should be configured to obtain an IP address
automatically via DHCP.
If your network uses static IP addresses, be sure the switch and computer are
configured with valid IP addresses.
Technical Support
Thank you for selecting NETGEAR products.
After completing setup and configuration, locate the serial number on the bottom
label of the Smart Switch and use it to register your product at
Registration on the web site or over the phone is required before you can use our
telephone support service. The phone numbers for worldwide regional customer
support centers are on the Warranty and Support Information card that came with
your product.
Go to
for product updates and web support.